Used  Welding Machinery Monthly Sales Products Special Sales Contact Us Site Map


Used Positioners

assorted used positioners

Used positioners for sale rent or purchase, pipe welding positions, rotating tilting geared turntables, gripper welding chucks


Aronson AW-300A Used Positioner. 300 lb capacity @ 12” c.g.. .2 to 6.0 RPM variable speed rotation. 360 degree manual tilt with brake and 45 degree pin lock indexing. 8” diameter round table. Forward/stop/reverse foot pedal. Pendant control. 120 volt. Serial #510-90179

Teledyne Readco Model UPC-10 Positioner. 1,000 lb Capacity @ 6" C.G.. Power Tilt, Variable Speed Rotation from .040 to 2.0 RPM. Manual Adjustable Table Height from 31 1/4" to 55 1/4" in 6" Increments. 29" Round Table with Slots. Pendant Control. On/Off Foot Pedal. 460 volt. Shipping weight 1,050 lbs. Serial #104196.

Model D-10A 1,000 lb Used Aronson Positioner. 1,000 lb capacity @ 4” c.g.. 135 degree power tilt. Variable speed rotation from 0.0 to 3.25 rpm. Manual adjustable height from 17.75” to 32.125” in 7” increments. 24” round table with slots. Pendant control for all functions. 460 volt. Serial #8629-1

Aronson Model HD-20A 2,000 lb Positioner. 2,000 lb capacity @ 6” c.g., Power tilt. Variable speed rotation from .07 to 2.0 rpm. Manual adjustable table height from 58” to 82” in 8” increments. Positioner currently has 34” riser with legs. 24” round table with slots. Pendant control for all functions.115 volt. Shipping weight 1,500 lbs.

Ransome Model 25P 2,500 lb Positioner. 2,500 lb capacity @ 6” c.g., 135 degree power tilt. Variable speed rotation from .038 to 1.55 RPM. Adjustable table height from 41” to 59” in 6” increments. 32” x 32” square slotted table. Pendant control. 460 volt. Shipping weight 2,100 lbs.

Cullen-Freistedt Model 60 6,000 lb Positioner. 6,000 lb capacity @ 12” c.g., 135 degree power tilt. Constant speed rotation. Manual adjustable table height from 62” to 74” with the table flat. 40” x 40” square 7/8” thick table. Pendant control. 460 volt. Serial # 732.

Aronson 180T120/CC 180 Degree Tilter. 7,000 lb weight capacity @ 12” c.g. from table. Table tilts 180 degrees from vertical to vertical. For positioning long work pieces such as long truck frames for down hand welding. Table does NOT rotate. Table is a dual screw clamping table with an internal capacity of 40” wide x 27.5” high.

Cullen-Freistedt Model 140 14,000 lb Positioner. 14,000 lb capacity @ 12” c.g., 135 degree power tilt. Variable speed rotation. Manual adjustable table height from 68” to 86” with the table flat. 54” x 54” diameter square table with slots. Pendant control. 230 or 460 volt. Serial # 138.

Pandjiris Model DC-150-VPL “Drop-Center” Positioner. Rotation Capacity of 12,000 lbs @ 12” Center of Gravity off of the centerline of rotation. Constant speed powered elevation. Center section has two adjustments from 25” to 97” and 45” to 117”. Inside Distance Between Upright Sides is 20’. 360 deg. Rotation @ 0.0-2.0 RPM, 200 deg. Tilt @ 0.0-1.75 RPM. Table is 60” Round with slots.

Aronson Model HD-160 16,000 lb Positioner. 16,000 lb Capacity @ 12” c.g., 135 degree power tilt. Variable speed rotation from .006 to .6 rpm. Fixed elevation at 59”. 54” square table with slots. Pendant control for all functions. All motors and controls will be new. 230 or 460 volt. Shipping weight 7,650 lbs. Serial # n/a All motors and controls will be new when reconditioned 

Cullen-Freistedt Model 200 20,000 lb Positioner. 20,000 lb capacity @ 20” c.g.. 135 degree power tilt. Variable speed rotation from .025 to 1.0 RPM. 48” round table. Fixed table height of 52”. Pendant control for all functions.

Brantford Tool Model LP 60T 120,000 lb Hydraulic Positioner. 120,000 lb Capacity @ 12” c.g., 90 degree hydraulic powered tilt. Variable speed rotation from .006 to .6 rpm. 113” round table with (6) T-slots.74” table height horizonal. 123” to the center of table vertical. 8’ 6” Maximum diameter in vertical position. Pendant control for all functions. 575 volt. Shipping weight 48,500 lbs.

 


Used Welding Machinery


January | February | March | April | May | June | July
August
| September | October | November | December


513.941.4411 - 1.800.288.9414 - Fax 1.513.467.3585

sales@usedweldingmachinery.com
Send mail to webmaster@usedweldingmachinery.com 
with questions or comments about this web site.
Site Map
Copyright © 1996-2017
Last modified: January 4, 2017