Used  Welding Machinery Monthly Sales Products Special Sales Contact Us Site Map


Used Manipulators

used manipulatorsPandjiris Used Manipulator

Used Column, Mast Welding Boom Manipulators for Pipe. 
Tanks and Vessel Sub Arc Welding


M606017 Ransome Model 44 4’ x 4’ Reconditioned Used Manipulator for Welding and Travel Car. 4’ Constant Speed Powered Lift from 25” to 73”. Manual Reach from 9” to 57” from the Center of Mast Rotation. Manual King Pin Base. Manual Travel Car. 115 Volt. Serial #0526806 Good Condition 

M901023P Pandjiris 4’ x 37’ Telescoping Boom Manipulator. 191” overall height. 48” constant speed powered elevation from 57-3/4” to 105-3/4” to the centerline of the arm. 3 to 116 IPM variable speed powered reach telescoping boom with a total reach of 37’6”. Fixed non swivel bolt down base. 460 volt. Serial #60-4596 Good Condition 

M100404 G6VRA6CL-PK 6’ x 6’  Used Aronson Manipulator. 400 lb load capacity either or both ends. 6’ constant speed powered elevation from 29.5” to 101.5”. 3.3 to 100 IPM variable speed reach from 13” to 85” from the center of the mast rotation. 360 degree manual mast rotation on a portable “X” frame base. 230 or 460 volt. Serial #97558 Good Condition

M903004 Preston-Eastin MA-66MD 6’ x 6’ Weld Manipulator used for welding pipe. 150 lb weight capacity either or both ends. 6’ powered lift from 24-1/4” to 96-1/4”. 6’ 4.0 to 100 IPM variable speed powered reach from 18-1/2” to 90-1/2”. 360 degree manual mast rotation. Bolt down base. 115 volt. Serial #MB66MD-27

M908003P Ransome Model 1212 6’ x 8’ Manipulator and Travel Car with Track. 6’ constant speed lift from 57.75” to 105.75”. 1 to 62 IPM variable speed reach from 27” to 122”. 360 degree manual mast rotation. 5 to 200 IPM Variable speed travel car that runs on 70’ (2 sections 20’, 3 sections 10’) of 33 gauge track. Currently equipped with 4 ea Lincoln DC-600 power supplies, 2 ea Lincoln NA-3N controls with feed heads, vertical and horizontal adjusters for each weld head all mounted on manual spotting cars mounted on the manipulator boom and an Invincible flux recovery system. 460 volt. Serial #629592

M904018 Ransome Model XXHD 7’ x 15’ Travel Car Manipulator. 7’ powered elevation from 77” to 164” to the bottom of the boom. 2.7 to 108 IPM variable speed reach from 64” to 244” from the center of the mast rotation. 360 degree power mast rotation. 2,000 lb load capacity either or both ends. Mounted on a variable speed travel car that runs on 84” gauge rail track. Track NOT Included. 460 volt. Serial #909286 

M309004 Mark "V" 8' x 5' Manipulator and Travel Car. 8' Constant Speed Power Elevation from 32" to 128". 5' Variable Speed Power Reach from 15" to 75". Manual Mast Rotation. With 6" Linde Powered Horizontal and Vertical Cross Slides and a Manual Rotary Slide. All Mounted on a Manual Travel Car that Runs on Inverted Angle Iron Track (Track Not Included). Currently Equipped with a L-Tec 650 CC/CV Power Supply, GMA Feed Head and all Cables. Remote Control Console for all functions Including Welding Process. Serial #6620-34-31

M404001 Precision 9’ x 9’ x 27-1/2’ Heavy Duty Manipulator/Travel Car System. This system was manufactured for the Robotics Industry for precision welding on military vehicles. Heavy Duty Mast has 9 ft. of constant speed of precision screw driven lift starting at approx. 36” from the floor to 144” high under the boom. The mast has manual rotation with lock. Boom has 9 ft. of “Dual Pinion” variable speed gear drive and rolls on Thompson Round way roller system. Weight capacity approx. 750 lb. Travel car is 5’ x 5’ x 19” High and Variable Speed Rack & Pinion Drive on 33 ft. of Thompson Round way Precision Track. All three (3)-axis paths are accordion booted. This system is now Servo driven. We will change to Pendant AC-Inverter or D.C. Drives.

M103004 Aronson Model 2G10VRA10CL-SK 10’ x 10’ Weld Manipulators, 400 lb weight capacity either or both ends. 10’ constant speed powered lift from 37.25” to 157.25”. 10’ Variable speed reach from 13” to 133” from the center of the mast. Manual mast rotation. Mounted on a manual travel car with 10’ inverted angle iron track. Currently equipped with a Lincoln DC-600 power supply, a Lincoln NA-5 head and control, cables and vertical and horizontal adjusters. 230 Volt. Serial #733

M905017 Aronson 2G10VRA10CL-PK 10’ x 10’ Locust “II” Manipulator. 119.5” variable speed reach from 13.5” to 133” from the center of the mast rotational axis. 120” constant speed lift from 49” to 169”. 400 lb load capacity either or both ends. 360 degree manual mast rotation. Portable “X” frame base with caster option. Pendant control. 230 or 460 volt. Serial #8022

M807004 Ransome Manipulator Model 1212 12’ x 12’ Travel Car 750 lb weight capacity either or both ends. 38 ipm constant speed power lift from 62.25” to 206.25”. 3.35 to 134 ipm variable speed reach from 39.5” to 183.5”. 360 degree manual mast rotation. Mounted on a 33 gauge rack and pinion travel car with a speed range from 5 to 200 ipm. Travel car includes 30’ of track. Pendant control for all functions. Welding equipment NOT included. 460 volt. Serial #692597 

M100530P Webb MB1212 12’ x 12’ Travel Car Used Manipulator. 12’ constant speed screw driven powered lift from 51” to 195”. Variable speed rack & pinion driven reach from 32” to 176”. 360 degree manual mast rotation. Mounted on a variable speed travel car that runs on 56-1/2” gauge track (track NOT included). 230 or 460 volt. Serial #7042

M710002 Ransome Model XXHD 13.5’ x 18’ Travel Car Manipulator. 13.5’ powered elevation from 77-1/2” to 239-1/2”” to the bottom of the boom. 2.7 to 108 IPM variable speed reach from 55” to 271” from the center of the mast rotation. 360 degree power mast rotation. 2,000 lb load capacity either or both ends. Mounted on a variable speed travel car that runs on 84” gauge rail track. Track NOT Included. 460 volt. Serial #639089


January | February | March | April | May | June | July
August
| September | October | November | December


513.941.4411 - 1.800.288.9414 - Fax 1.513.467.3585
sales@usedweldingmachinery.com
Send mail to webmaster@usedweldingmachinery.com 
with questions or comments about this web site.
Site Map
Copyright © 1996-2013 Weld Plus Inc.
Last modified: May 13, 2013