UWM - Longitudinal Seamer - Circumferential Weld Seamers

Longitudinal Seamers, Circumferential Used Seam Welders, Weld Seamers, Welding Lathes, Titling Welding Turn Tables, Rotary Welding Systems, Pipe Rotators, Headstock - Tailstocks Side Beam Carriage Gantry Welding Stations and Circle Welders.

Weld Lathe For Longitudinal Seamer and Circumferential Seam Welding

L501001 WeldLogic CWT-12-15 TIG Welding Lathe System. CWT-12-15 Variable Speed Headstock with Pneumatic Tailstock, 4" stroke. Arc Length Controlled Vertical Slide. 6" 3-Jaw Self-Centering Chuck. Pneumatic Torch Retract (to rear). Manual Vertical Slide w/ 10" of Adjustment. Manual Rotary Slide for Torch Angle Adjustment. Cold Wire Feeder and Mini Wire Delivery Guide. WP-22 Automatic Tig Torch. Max Part Length – 15", Max Part Diameter – 10-1/2". Serial #9413-014 Very Good Condition

L512002 Bancroft High Capacity 3 Station, Dual Torch, Indexing Welding Lathe. 23" Length Capacity, 12" Diameter Capacity. 3 Position Indexing Turret for Loading of Parts, Welding of Parts and Cooling of Parts. 2 Torches for Welding on both Ends of Parts. GMAW Welding Equipment Includes 2 each Miller S-62 Wire Feeders with Tweco Water Cooled Auto Guns on 4" Bancroft Retractable Air Slides. Serial #3327/109-843 Good Condition

L601001 Jetline Model CWP-24 90 Degree Power Tilting Lathe Bed. 200 lb Weight Capacity. 20.5" Length Capacity. 12" Diameter Capacity. For use as a Vertical or Horizontal Welding Lathe with a 90 Degree Powered Tilting Bed. 8" Capacity Chuck with a 1/2" thru hole for back purging. 3" Air Actuated Tailstock for Part Clamping. Jetline ALC101-V4T Arc Length Controller. Jetline Model 9024-101 Circumferential Tig Weld Sequencer. Variable Speed Torch Carriage for Either Circumferential or Longitudinal Welding. Powered Torch Lifter. Powered Slides. 115 volt. Serial #920131 Good Condition

L504001 Custom Lathe Welding Fixture. Estimated weight capacity 350 lbs. Swing Dia. 48", Tailstock is Power Driven on a Lead Screw to increase the available part length from approx. min. of 19’’ to max. of 60". Variable Speed Rotation by DC Drive with Manual Shift Transmission for Three forward Speed Range and One Reverse. Rotating Welding Ground included. As Is in Working Order

L502001 Centurion Model WL24X168 Welding Lathe. 24" Diameter Capacity. 168" Length Capacity. Variable Speed Travel Car and a Manual Spotting Car. Pandjiris Model "A" 31-1/4" Capacity "Gripper" Chuck. Manual Tailstock Mounted on a Powered Travel Car. Powered Elevation Side Beam. Includes a Lincoln DC-600 Power Supply with a NA-3N Sub-Arc System. Good Condition

Click here for Weld Plus Web Site

Cypress CW-5 (CWE-1500) Programmable Circle Welder. For solid wire or flux cored welding process. 1”-12” welding diameter capacity. Variable speed rotation from .3 to 130 ipm. The CW-5 may be used with any CV power supply with connections for 115 VAC and weld contactor. Features include: Wire feed head and control, gun and cable assembly, burnback control, 50’ control cable and gas hose, vertical and horizontal rack adjustment, rise and fall cam with 5” of movement, pre and post flow kit, over lap function and return to start position function. 115 volt. Serial #60707222001A Purchased NEW in June, 2007 – NEVER USED

Cypress CW-5 (CWE-1500) Programmable Circle Welder. For solid wire or flux cored welding process. 1”-12” welding diameter capacity. Variable speed rotation from .3 to 130 ipm. The CW-5 may be used with any CV power supply with connections for 115 VAC and weld contactor. Features include: Wire feed head and control, gun and cable assembly, burnback control, 50’ control cable and gas hose, vertical and horizontal rack adjustment, rise and fall cam with 5” of movement, pre and post flow kit, over lap function and return to start position function. 115 volt. Serial #60707222002A Purchased NEW in June, 2007 – NEVER USED

CM809007 Bug-O Uni-Bug II Self-Guided Cutting System. The Uni-Bug II will carry a torch into very tight area or around very tight curves without the use of a track. Can cut straight line or radii as small as 6”. Variable speed travel from 4 to 75 ipm. Designed to run on the edge of a bar or stiffener up to 2” thick. 120 volt. Serial #0620900. Good Condition

CM808014 Koike Model KHC-600D Portable Pipe Oxy/Fuel Hole Cutting Machine. 3.5” to 23” hole cutting diameter range. 0-4” rise and fall torch lift. Rotating gas manifold. Can be used to cut holes in pipe, vessels or flat plate. Includes cutting torch. 115 volt. Serial #053811.Purchased NEW in June, 2007 – NEVER USED

CM808015 Koike Model KHC-600D Portable Pipe Oxy/Fuel Hole Cutting Machine. 3.5” to 23” hole cutting diameter range. 0-4” rise and fall torch lift. Rotating gas manifold. Can be used to cut holes in pipe, vessels or flat plate. 115 volt. Includes cutting torch. Serial #053815. Purchased NEW in June, 2007 – NEVER USED

Jetline 12" Coil End Joining Seam Welder. This seam welder’s primary use is to join together strips fed from coils. The Jetline Seamer Clamping /Welding bed is 12-1/2" long. Has a Variable Speed Carriage with #9026 Control and two manual cross slides on the torch holder. The one piece hold down clamps are air actuated with individual air valves. Dimensions of the whole system are 78" lg. x 40" w x 58" h. Jetline Ser. 84166. Very Good Condition

Cecil Peck "Dual Position" Outside Corner Seam Welder. This Machine was Used to Tig Weld the Outside Corners of Aluminum, Steel and Stainless Electric Panel Boxes. The Dual Operator Positions were Used for Weld Lengths up to 17" Long. The Air Clamping Device and Copper Mandrel Plates Could be Increased (Within Reason) for Longer Welds. The Torch Carriers are Heavy Duty Variable Speed Devices that are ½ H.P. Dc Motors & Drives. Reconditioned with 2 Cold Wire Feeders or Converted to Mig Welding Including Power Sources