Rotary Turntable - Turn Tables

New and reconditioned used, rotary turntables. The bench top turn tables are used to rotate pipe and parts as well to weld position the piece while welding. The rotary tables are light weight and often used on bench tops or a table. This allows a welder to have the pipe or part to be welded at a comfortable height. Some of the turntable weld positioners have fixed positions of tilt were as other have infinite tilt positioning from flat to 90 degrees. All bench top positioners listed are built in the USA.

MBC Rotary Benchtop Turntable Positioner

"New" Model BP-2-A or BP-2-B, 200 lb Rotary Turntable - Small Welding Positioners. Capacity 200 lbs balanced load in the horizontal position, 100 lbs in the vertical. 12" diameter slotted faceplate. Variable Speed Rotation, H.F. Protected, On off Foot Switch, Manual Hand wheel Tilt, 115 volt Rotating Turntable Positioner for pipe and tube welding applications.

Available with 3-Jaw 9" or 2-Jaw 9" Quick Lever Chuck.

Capacity 200 lbs. balanced load in the horizontal position
100 lbs. balanced load in the vertical position

Table Diameter 12" steel slotted ground plate

Table Thickness 5/16"

Table Tilt 10 degrees forward, 90 degrees backwards infinitely variable with hand crank and locking bolt

Power Requirements 110 volt 60 cycle

Motor Permanent magnet DC gearmotor 1/12 H.P. 90 volt

Speed Control Solid State DC-SCR
High Frequency Filter
Fused overload protection with power on indicator light

Speed Range

BP-2-A 0-4.5 RPM 102 in.lbs.Torque

BP-2-B 0-9 RPM 102 in.lbs.Torque

BP-2-SB 0-18 RPM 56 in.lbs.Torque

Foot Switch Unit comes with standard duty on-off foot switch-BP-245

Ground Current 250 AMP

Shipping Weight 56 lbs. (can be UPS'ed)

R2 Rotary Weld Turn Table

R2 Rotary Table 200 lb Bench Top Positioner with a 2" thru hole design with optional AGP- 2 Through Hole Purge. These are "New" welding positioner in stock. Capacity 200 lbs balanced load with the part in the horizontal position, table vertical. 100 lbs with the part in the vertical position weld table flat. 13" dia. slotted faceplate 5/16th thick with 2" thru hole. Variable Speed Rotation 0-6 RPM, 102 in lb torque, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. Shipping weight 65 lbs.

Mini Pro Small Rotary Bench Top Positioner

Mini Pro Rotary Turn Table 350 lb Mini Positioner. 350 lb Horizontal Capacity, 350 lb Vertical Capacity. Variable Speed from .37 to 13.0 RPM. 0 to 90 Degree Manual Pin Lock Tilt in 15 Degree Increments. 8” Diameter 3-Jaw Self Centering Chuck with a 2.5” Thru Hole. On/Off Foot Switch. 115 Volt. Shipping weight 105 lbs. This positioners comes complete with on/off foot pedal and through hole welding chuck.

January | February | March | April | May | June | July
August | September | October | November | December

Home | Monthly Sales | Products | Specials | Contact

513.941.4411 - 1.800.288.9414 - Fax 1.513.467.3585
sales@usedweldingmachinery.com
Send mail to webmaster@usedweldingmachinery.com
with questions or comments about this web site.
Site Map
Copyright © 1996-2013 Weld Plus Inc.
Last modified: May 17, 2013