UWM - Welding Self Aligning Pipe Rollers, Turbine Turning Rolls

Pipe rollers, turbine turning rolls, tank roller, self aligning vessel rotators. We stock new, reconditioned and used welding rolls

Turning Turbine Rolls and Rotators

TURBINE ROLLS

Koike Aronson Ransome 100 Ton MICARTA Turbine Rotor Turning Rolls. Model 100 PRM Power Roll, Model 50IRM Idler Roll. Micarta Rolls are 22" diameter X 8" wide Micarta Surface. Roller Center Line Distance 23", For Shaft diameters from 8" to 32", 3 HP AC Inverter Drive, Variable Surface Speed of Roller from 1.5 to 60 IPM. Pendant Control w/40’ of Control Cable with Forward, Stop, Reverse, 10 Turn Pot. Speed Control and Rapid Traverse. Input Power Required 460 volts, 60 Hz. 3 phase. "New"

Welding Tank & Pipe Rollers

weld plus 6000 lbs turning rolls pipe turning rolls tank turning rolls

Turn Rolls to handle weights from 2000 lbs up to 30,000 lbs.
The diameter range for the tanks or pipe is 1/2" to 22'

*Model*	*WPI-6*	*WPI-18*	*WPI-24*	*WPI-30*
Turning Capacity, Power, Pounds	6,000	18,000	24,000	30,000
Weight Capacity, Each Unit, Pounds	3,000	6,000	8,000	10,000
Total Wt. Capacity, per SET	6,000	18,000	24,000	30,000
Motor, Horsepower	1/2	1	1	1
Speed Range, IPM	0-40	0-45	0-45	0-45
Wheel Width, Inches	6"	7"	10 1/2"	14"
Number of Tires per AXLE	2	2	3	4
Number of Axles per UNIT	2	2
Maximum Work Diameter, Feet	7'	12'
Minimum Work Diameter, Inches	3"	12"
Tire Diameter, Inches	10"	12"
Center to Center Spacing, Inches	12" 24" 36"	18" 31" 44" 57"
Height to Top of Tire, Inches	12 7/8"	18"
Control Cable Length, Feet	20'	20'
Power Unit Length	61"	8' -5"
Power Unit Width	19"	2' -5 1/2"
Idler Unit Length	49"	6'- 7"
Idler Unit Width	11"	1' -9"	2' -0 1/2"	2' -4"
Shipping Wt. Power Unit, APPROX	300	970	1050	1130
Shipping Wt. Idler Unit, APPROX	190	450	530	610

*Model*	*WPI-500*	*WPI-1000*	*WPI-1500*	*WPI-M500*	*WPI-M1000*	*WPI-M1500*
Turning Capacity, Power, Pounds	50,000	100,000	150,000	60,000	120,000	180,000
Weight Capacity, Each Unit, Pounds	17,000	33,000	50,000	20,000	40,000	60,000
Total Wt. Capacity, per SET	50,000	100,000	150,000	60,000	120,000	180,000
Motor, Horsepower	2	3	5	2	3	5
Speed Range, IPM	7-58	7-58	7-56	7-61	7-58	7-58
Wheel Width, Inches	7"	14"	21"	7"	14"	21"
Number of Tires per AXLE	1	2	3	1	2	3
Number of Axles per UNIT	2			2
Maximum Work Diameter, Feet	15'			14'
Minimum Work Diameter, Inches	6"			24"
Tire Diameter, Inches	18"			22"
Center to Center Spacing, Inches	23 1/2" 41" 58" 75"			33" 46" 59" 72"
Height to Top of Tire, Inches	22 1/2"			30"
Control Cable Length, Feet	30'			30'
Power Unit Length	10' -10"			10'- 8"
Power Unit Width	4' -0"		4'- 8"	3'- 4"		4'- 4"
Idler Unit Length	8'- 6"			9'- 4"
Idler Unit Width	2'- 8"			2'- 6"		3'- 6"
Shipping Wt. Power Unit, APPROX	2,200	2,800	3,400	2,800	3,500	4,300
Shipping Wt. Idler Unit, APPROX	850	1,250	1,650	1,400	1,800	2,400

Pipe Rollers, Vessel Rotators, Welding Tank Rolls

Be-co Model F-400 Standard Universal Power Unit. Intended for both automatic and hand work, the F-400 is equipped with a ½-horsepower AC/DC motor, a 400:1 gear ratio, and dual-speed drive allowing either 3 to 20 or 5 to 30 inch-per-minute rotational speed. Our Standard BE-CO units will accommodate pipe sizes from 2" to 10’ diameters with quick-connecting expansion chains.

PRO TR1500 "New" Profax 1,500 lb Pipe Rollers. 1,500 lb Turning Capacity (750 lb Max Set Down Weight for each the Drive and Idler). 1-1/2" to 16" Diameter Capacity. Variable Speed from 0.0 to 140 IPM. 10" Diameter x 2" Wide Rubber Wheels. High Frequency Protected. 115 Volt. Brand New – Ready to Ship !

TRD2000/WRI2000 "NEW" Weld Plus #2000 Welding Rolls. Drive Roll & Idler each have a capacity of 2000 lbs. For diameters from ½" to 40". 10" dia. wheels, High Frequency Protection, Variable Speed Control. With Foot Switch. 115 volt

TR0100 "NEW" Gentec Turning roll set Model TR-0100 2,200 lb Turning Roll Set. 2,200 lb total weight capacity. 1" to 31" diameter capacity. Variable speed from 3.5 to 63 IPM. 2" wide x 8" diameter polyurethane wheels. High frequency protected. 115 volt. NEW in Stock!! Ready to Ship !

PAN PIPER 3 "NEW" Pandjiris Piper 3 Pipe Turning Rolls. 4,000 lb Load Capacity, Add an Additional Idler for a Total Capacity of 6,000 lb. 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Drive and 1 ea. Idler. Pendant Control. "NEW" !

RPJS 50 Preston-Eastin Model RPJS-50 5,000 lb Pipe Dollies Support Stand. 5,000 lb weight capacity. 2” to 40” diameter capacity. Manual adjustable height from 27.5” to 37.5” to the top of the rolls. Brand New – Ready to Ship!

WPI T6/I6 "NEW" Weld Plus #6000 Turning Rolls. 6000 lb Capacity Set Includes: 1 Drive Roll & 1 Idler Roll. Each Axle Has Double 10" X 2" Rubber Rolls. Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From 3" to 72" via 3 Ctr. 115 volt. Ship Wt. 490 lbs/set. "NEW"

WPI T9D 8 "NEW" Weld Plus #6000 Welding Turning Rollers. 6000 lb Capacity (Add an additional idler for a total capacity of 9,000 lb.). Set Includes: 1 Drive Roll & 1 Idler Roll. Dual Driven Power Unit. Each Axle Has Double 10" X 2" Rubber Rolls. Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From 3" to 96" via 4 Ctr. 115 volt. Ship Wt. 580 lbs/set. "NEW"

T-18/I-18 "NEW" 12,000 lb Turning Rolls. Set Includes 1 T-18 Driver and 1 I-18 Idler (add extra Idler for 18,000 lb Capacity). 12" Diameter Rubber Wheels, 2 Wheels per Axle for 7" Total Wheel Face. For Diameters from 12" to 12’. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship!

TANKER 150/75 "NEW" 15,000 lb Pandjiris Tanker Turning Roll Set. 15,000 lb weight capacity. 3.5" to 12’ diameter capacity. Variable speed from 2.9 to 72 IPM. 25’ pendant control. 115 volt. No wheel adjustments to be made for the full range of diameters and Tankers maintain a constant center line !! NEW in Stock!! Ready to Ship

T-24/I-24 "NEW" 16,000 lb Tank Turning Rolls. Set Includes 1 T-24 Driver and 1 I-24 Idler (add extra Idler for 24,000 lb Capacity). 12" Diameter Rubber Wheels, 3 Wheels per Axle for 10.5" Total Wheel Face. For Diameters from 12" to 16’. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship!

WEB T-30/I-30 "NEW" Webb 20,000 lb Turning Rolls. Set Includes 1 T-30 Driver and 1 I-30 Idler (add extra Idler for 30,000 lb Capacity). 12" Diameter Rubber Wheels, 4 Wheels per Axle for 14" Total Wheel Face. For Diameters from 12" to 16'. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship!

Preston-Eastin TDRA-20HD Tank Turning Roll Set. 40,000 lb capacity when paired with TIRA-20HD idler, 60,000 lb capacity when paired with 2 each TIRA-20HD idlers. 6" to 14’ diameter capacity. Variable speed from 1.9 to 57 IPM. 30’ Remote pendant control. 230/460 volt. Set includes 1 drive and 1 idler

R-500/I-500 "NEW" 40,000 lb Turning Rolls. Set Includes 1 R-500 Drive and 1 I-500 Idler (add extra Idler for 60,000 lb Capacity). 18" Diameter Rubber Wheels, 1 Wheel per Axle with a Wheel Face of 7". For Diameters from 10" to 15’. Variable Speed from 7 to 58 IPM. With Remote Pendant Control. 230/460 Volt. Brand New

1 set PAN MM30/15 "NEW" Pandjiris Missouri Mule 30/15 Turning Rolls. Drive and Idler. 60,000 lb Weight Capacity. 12" to 16’ Diameter Capacity. Variable Speed from 5.3 to 53 IPM. 20" Diameter x 10" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW" Additional Idlers Available

CPRR / CIRR “NEW” Ransome 60 Ton “C” Series Koike Turning Roll Set. Set includes 1 each CPRR drive unit and 1 each CIRR idler unit for a capacity of 60,000 lb (add an additional idler for a total capacity of 120,000 lb). Variable Speed drive from 1.45 to 58 ipm. 20.5” diameter x 14” wide rubber wheels. For diameters from 7” minimum to 20’ maximum. 20’ Pendant control for all functions. 460 volt. Shipping weight 5,600 lbs/set. NEW – Ready to Ship!

R-1000/I-1000 "NEW" 66,000 lb Turning Rolls. Set Includes: 1 ea R-1000 Driver, 1 ea R-1000 Idler (add extra idler for 100,000 lb capacity). Rubber Wheel diameter 18" with 2 Wheels per axle for a Total Wheel face of 14". For Diameters from 10" to 20'. Variable Speed fro 7 to 58 IPM. With Remote Pendant Control. 1 year warranty. We stock 460 volt, 230 on request. Brand New – Ready to Ship

R-1500, 100,000 lb Turning Rolls. Set Includes: 1 ea R-1500 Driver, 1 ea R- 1500 Idler (add extra idler for 150,000 lb capacity). Rubber Wheel diameter 18" with 3 Wheels per axle for a Total Wheel face of 21". For Diameters from 10" to 22'. Variable Speed from 7 to 56 IPM. With Remote Pendant Control. 1 year warranty. We stock 460 volt, 230 on request. Brand New – Ready to Ship!

Koike Ransome "NEW" 100 Ton "MICARTA" Turbine Turning Rolls. Model 100 PRM Power Roll, Model 50IRM Idler Roll. Micarta Rolls are 22" diameter X 8" wide Micarta Surface. Roller Center Line Distance 23", For Shaft diameters from 8" to 32", 3 HP AC Inverter Drive, Variable Surface Speed of Roller from 1.5 to 60 IPM. Pendant Control w/40’ of Control Cable with Forward, Stop, Reverse, 10 Turn Pot. Speed Control and Rapid Traverse. Input Power Required 460 volts, 60 Hz. 3 phase. "New" in our Stock!

Preston-Eastin "NEW" TDRA/TIRA-120-22D, 240,000 lbs, 120 Ton, Vessel Turning Rolls. Set includes 1 ea TDRA-120, 120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total Capacity of 240,000 lbs or 120 tons. This set will Turn and Support 360,000 lbs or 180 tons by adding optional extra TIRA-120 Idler. Three (3) Tires 20" dia. x 8" wide and Four (4) Overload Disc per Axle. For work rotating diameters from 8" to 22 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote Pendant Control. 460 volt input. "New" in our Stock!

PR180/60 "NEW" Model PR-180/60 Pandjiris Turning Rolls. Drive and Idler. 120,000 lb Weight Capacity (Add a Second Idler Roll for a Total Capacity of 180,000 lb). 12" to 21’ Diameter Capacity. Variable Speed from 3.0 to 75 IPM. 20" Diameter x 15" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW"

PR270/90 "NEW" Pandjiris Model PR-270/90 Tank Turning Rollers. Drive and Idler. 180,000 lb Weight Capacity (Add a Second Idler Roll for a Total Capacity of 270,000 lb). 12" to 21’ Diameter Capacity. Variable Speed from 5.6 to 55.7 IPM. 20" Diameter x 20" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW"

Call Us For Pricing
1.800.288.9414 - 1-513-941-4411 - 1-513-467-3858 Fax

October Special Sale Items Are Subject to Availability.
Many In Stock or On the Way in to our Inventory

Home | Monthly Sales | Products | Specials | Contact

513.941.4411 - 1.800.288.9414 - Fax 1.513.467.3585
sales@usedweldingmachinery.com
Send mail to webmaster@usedweldingmachinery.com
with questions or comments about this web site.
Site Map
Copyright © 1996-2009 Weld Plus Inc.
Last modified: January 10, 2009