Used  Welding Machinery Monthly Sales Products Special Sales Contact Us Site Map


Rebuilt Used Seam Welders


Seam Welding Used for Metal Joining
Plate or Cylinders Seamers - Longitudinal & Circumferential
  

Used Welding Seamer efore ReconditioningUsed Seam Welder After Reconditioning


Used Welding Seamer Used for Arc Seam Welding
Seamers are Sold As-Is or completely rebuilt for your application
All welding processes
can be integrate on the seam welders

S604011 “1990”Mills Machine 11” Longitudinal Plasma Seam Welder   
  • 11” overall welding / clamping length capacity
  • 3-1/2” to 5-1/2” diameter capacity (can be increased with a riser)
  • Variable speed screw driven carriage
  • 3” pneumatic torch lifter
  • Gas purge back-up bar
  • Water cooled mandrel
  • Dual water circulators
  • Plasma welding equipment includes a thermal dynamics WC100B welding console
  • Airco Heliwelder power supply and multi slope 2 sequence control
  • Model 3A plasma torch and a Cyclomatic 80A magnetic welds oscillator
  • Serial #N/A
S9801001A Custom GE Precision 12” Arc Seam Welder
  • 12” total clamping length capacity
  • 16” total welding length
  • 12” minimum part diameter and maximum diameter of 36”
  • Foot controlled pneumatic clamping
  • Variable speed precision carriage
  • 1 1/2“manual horizontal torch adjustment and 3” manual vertical torch adjustment
  • 115 volt
  • Shipping weight 650 lb.
  • Serial #11219
  • Welding Equipment NOT included
S502007 Jetline 12” Coil End Joining Seamer
  • This seam welder’s primary use is to join together strips fed from coils
  • The Jetline seamer clamping/welding bed is 12-1/2” long
  • Has a variable speed carriage with #9026 control and two manual cross slides on the torch holder
  • The one piece hold down clamps are air actuated with individual air valves
  • There are 2 8” diameter primary strip guide rolls and 2  3” final guide rolls
  • The welding package is a Miller 50A precision TIG welding power supply and air-cooled TIG Torch for the fusion only weld
  • The whole system is mounted on a self-contained portable base
  • Dimensions of the whole system are 78”L x 40”Wx 58”H
  • Jetline Serial #84166
S121204 Jetline Model CS3-15Z 15” Coil End Joining Seam Welding       
  • 18” total welding/clamping length capacity
  • This seamer was used to plasma weld steel coils together
  • Precision screw driven carriage with Jetline 9627 control
  • 2” vertical and 2” horizontal manual torch adjustment slides
  • 4” vertical pneumatic torch lifter
  • Continuous copper tipped aluminum fingers
  • Gas purged back up bar
  • Cable track
  • Thermal Arc Ultima 150 Plasma welding system
  • Accucutter 3001 manual bench shear
  • Shear capacity is .015 steel and .040 aluminum
  • Dual plate alignment fingers
  • Alignment table to align sheet sides
  • Table is horizontally adjustable depending on the sheet width
  • Seamer and power supply roll on V-groove track with 7’ of travel
  • 115/ 200-460 volt
  • Serial # 080005

Complete Package

S511005A Spaulding Model 24 Outside Corner Welding Seamer                     
  • This Machine was used to TIG weld the outside corners of aluminum, steel and stainless electric panel boxes
  • 24” total vertical welding/clamping length capacity
  •  Arc Specialties main control
  • Jetline 9029 control wire feeder
  • Water cooled TIG torch
  • 24” powered vertical torch travel
  • 6” manual horizontal torch adjustment
  • 12” vertical clamping adjustment
  • Foot pedal controlled pneumatic clamping
  • 115 volt
  • Serial #N/A
 
S412001 Cecil Peck “Dual Position” Outside Corner Seam Welder           
  • This machine was used to TIG weld the outside corners of aluminum, steel and stainless electric panel boxes
  • The dual operator positions were used for weld lengths up to 17” long
  • The air clamping device and copper mandrel plates could be increased (within reason) for longer welds
  • The torch carriers are heavy duty variable speed devices that are ½ H.P. Dc motors & drives
  • Reconditioned with 2 Cold Wire Feeders or Converted to MIG Welding Including Power Sources
S10302 Jetline LWS-24Z, High Production, Automatic Seamer System       
  • This 1996 automatic plasma welding seam welder is a high production machine that features: automatic clamping & alignment for cylinders up to 24” long
  • 18” to 25” in diameter
  • .020 to .187 thickness
  • Microprocessor control
  • Thermal Arc Ultima 150 plasma welding system
  • Safety palm buttons & guards
  • Minimum operator skill required
  • This machine was used for a short run product

Very low hours

S111003 Lee Shaffer SW24FA-P, High Production Semi-Automatic Seamer  
  • Features: automatic alignment for cylinders up to 24” long
  • 5 1/2” to 40” in diameter
  • .020 to .187 thickness
  • Microprocessor control
  • Thermal Arc Ultima 150 plasma welding system
  • Safety palm button & guards
  • Micro air fume extractor
  • Designed for welding galvanized
  • 460/110 volt
  • Serial # 20013-d
  • Shipping weight 2,750
S120708P Pandjiris Model 36E 36” Seam Welding Machine                                             
  • 42” welding/clamping length capacity                                                    
  • 3 1/2” minimum part diameter
  • 30” maximum part diameter
  • Linde variable speed rack and pinion driven carriage with ESAB “J” governor carriage control
  • Foot pedal control for pneumatic clamping
  • 2” manual horizontal and vertical slides for torch adjustment
  • Water cooled mandrel
  • Gas purge back up bar
  • Miller Syncrowave 300 welder
  • 115 volt
  • Serial #400-945
S612013 Pandjiris Model 36ES-30 36” Welding Seamers                                       
  • 42” welding/clamping length capacity
  • 3” minimum part diameter
  • 30” maximum part diameter (can be increased with a riser)
  • Variable speed rack and pinion driven carriage
  • Water cooled mandrel
  • 6” Manual cross slides
  • WPI touch screen weld control
  • Serial #400-8078
S161005 Weldline Model SMR-48 External Seam welder  
  • 48" welding length
  • 54” clamping length
  • 4 1/2" – 38” external diameter capacity
  • 3” Wide individual aluminum hold down fingers w/ copper tips (Pneumatically actuated)
  • Dual plate alignment devices for easy part loading
  • Dual pneumatic foot pedals(front) and single pedal(rear) for part clamping control
  • Weldline rack and pinion carriage (0 to 100 IPM)
  • Weldline 181 carriage control
  • Miller Automatic 1DA welding system
  • 4” Manual vertical and horizontal slides
  • Manual rotary slide
  • 115V
  • 90 psi pneumatic air bags
  • Serial # 245
  • Shipping weight: 2,500 lbs.
  • Shipping dimensions: 88” L x 36” W x 96” H
S160702P Pandjiris Model 48-E-4/48 Seam welding system
  • 48" total welding length
  • 54” total clamping length
  • 4" – 48” external diameter capacity with current 16” riser
  • 3” Wide individual fingers Aluminum hold down fingers (Pneumatically actuated)
  • Dual pneumatic foot pedals for clamping control
  • Model 15-3 VSC rack and pinion carriage (3 to 116 IPM)
  • Pandjiris M-VSC Weld sequencer control  
  • 4” manual Vertical slide, 3” Manual Horizontal slide
  • 4” Pneumatic torch lifter
  • 180 dgree Automatic water cooled mig gun
  • Water cooled mandrel
  • Plate alignment device
  • Miller S-64M Mig control and feeder
  • Miller Coolmate 4 water circulator
  • 115V/Pneumatic
  • Serial # 10502 E00
  • Shipping weight: 3,500 lbs.
  • Shipping dimensions: 8 ' long x 4' wide x 8' high
  • Very Good Condition
S160603 Pandjiris Model 48E-6/30 4' External Weld Seamer
  • 54" total welding/ clamping length capacity
  • 4" – 32” external diameter capacity
  • .020 - 3/8" material thickness capacity
  • Model 15-3 VSC rack & pinion driven carriage
  • .1 to 100 IPM variable speed
  • Pandjiris EZ Link carriage control
  • 6” manual vertical & 6” manual horizontal torch adjusters
  • 3” wide aluminum fingers (No copper tips)
  • Plate alignment device
  • Water cooled mandrel
  • Gas purge back up bar
  • Serial # 400-7407
  • Shipping weight: 3,000 lbs.
  • Shipping dimensions: 9' long x 5' wide x 7' high
S150903 Airline Model LWS-48 48" Weld Seamers
  • 54" total welding/clamping length capacity
  • 5" minimum diameter capacity
  • 32" maximum diameter capacity (can be increased with a riser)
  • Model OM-48 rack & pinion driven variable speed carriage
  • 4" manual cross slide
  • Water cooled mandrel
  • Gas purge back-up bar
  • Shipping Weight - 3,100 lbs
  • Shipping Dimensions - 7' long x 4' wide x 7' high
S140924 Airline 48” Longitudinal Welding Seamer
  • 48” total welding/clamping length capacity
  • 3” wide continuous copper fingers
  • Rack and pinion driven carriage
  • WPI touch screen weld control
  • 90° angle bracket with 6”x 6” cross slides
  • Serial #N/A
  • Shipping dimensions: 9’ x 5’ x 8’
S100906 Airline/Jetline 48” Longitudinal Seamer Welding System 
  • 48” total welding/clamping length capacity
  • 3.5” minimum part diameter
  • 32” maximum part diameter capacity (can be increased with a riser)
  • Variable speed rack and pinion driven carriage
  • WPI touch screen weld control
  • New pneumatic system for finger hold down
  • Serial #N/A
S130905P Weldlogic Model X-48 48” Seamer Welding
  • 48” maximum welding/ 51”clamping length capacity
  • 4” minimum part diameter capacity
  • 32” maximum part diameter capacity (can be increased with a riser)
  • Variable speed rack and pinion carriage with Weld logic carriage control
  • 6” Pneumatic torch lifter
  • 3” manual vertical and 1” horizontal torch adjusters
  • 4 roll cold wire feeder
  • Weldlogic AWS-200N power supply
  • RPW150-4CH pendant control and Dell laptop computer for programming
  • Gas purged back up bar
  • Pneumatic part clamping
  • Cable track and tray to protect cables
  • Pneumatic plate alignment bar
  • Manual adjustment work piece stop block that attaches to mandrel
  • 460 volt
  • Pneumatic
S110804 48 Inch SAF Welding Seamer
  • 54" total welding/clamping length capacity
  • 8" minimum part diameter
  • 42" maximum part diameter
  • Rack and pinion driven
  • variable speed carriage
  • Retractable plate alignment arms
  • Steel fingers w/aluminum tips
  • Gas purge copper back-up bar
  • Water cooled mandrel
  • 2” Manual horizontal & 5” vertical torch adjustment
  • 1-1/2” vertical wire adjustment
  • Seamer currently equipped with SAF controls for TIG welding
  • Cable rail on back of seamer to suspend cables above the floor
  • 230 volt – 3 phase
  • Serial #899
S608005 Hamilton Custom 48” Weld Seamer
  • 52” Welding/Clamping Length
  • 9” minimum part diameter
  • 58” maximum part diameter capacity
  • Air clamping
  • Side beam, carriage and welding equipment NOT included
S708003 Berkeley-Davis Model S-2 5’ Weld Seamer
  • 60” total welding/clamping length capacity
  • 12” minimum part diameter
  • 72” maximum diameter
  • Rack & pinion driven variable speed carriage
  • Water cooled mandrel
  • 6” manual vertical and horizontal slides
  • Welding equipment NOT included
  • Serial #672548
S161001 Pandjiris Model 60 E 5 2/30 Seam welder  
  • 66" total welding/ clamping length
  • 5" – 50” external diameter capacity with current 18” riser
  • 3” Wide individual aluminum hold down fingers (Pneumatically actuated)
  • Dual pneumatic foot pedals for clamping control
  • Pandjiris Model VSC 15-3 rack and pinion carriage (0 to 100 IPM)
  • Miller Auto 1 weld control and A1-2 2 roll feeder
  • 4” Manual horizontal and vertical slides
  • Water cooled mandrel
  • Miller S-64M Mig control and wire feeder
  • 115V
  • 90 psi pneumatic air bags
  • Serial # 400-9943
  • Shipping weight: 4,000 lbs.
  • Shipping dimensions: 10' L x 4' W x 8' H 
S150208P Airline Model 10310P 60" seam welder
  • 66" total welding / clamping length capacity
  • 6" minimum diameter capacity, 22" maximum diameter capacity
  • Continuous clamping fingers
  • Variable speed rack and pinion driven carriage
  • 8" manual vertical adjuster
  • Shipping dimensions : 10' long x 4' wide x 8' high
  • Shipping weight: 4,800 lbs.
S130301 Weldline Model J-955 60” Weld Seamer 
  • 66” total welding/clamping length capacity
  • 3 1/2” minimum part diameter
  • 30” maximum diameter
  • Rack & pinion driven variable speed carriage with New WPI control
  • Standard mandrel
  • 2” manual vertical and horizontal slide with pancake swivel
  • Continuous copper fingers
  • Dual Jack screw powered part support at additional cost
  • Welding equipment NOT included
  • Serial #N/A
  • Dual Jack screw part support $6,250
S130302 Weldline Model J-955 60” Weld Seamer 
  • 66” total welding/clamping length capacity
  • 3 1/2” minimum part diameter
  • 30” maximum diameter
  • Rack & pinion driven variable speed carriage with New WPI control
  • Standard mandrel
  • 2” manual vertical and horizontal slide with pancake swivel
  • Continuous copper fingers
  • Dual Jack screw powered part support at additional cost
  • Welding equipment NOT included
  • Serial #N/A
  • Dual Jack screw part support $6,250
S161114 Jetline Model LWS-72 External Seam Welder
  • 78” welding/clamping length capacity
  • 6” minimum diameter capacity
  • 32” maximum diameter capacity (Can be increased with riser)
  • 3” wide individual aluminum fingers with copper tips
  • Constant speed carriage that runs on precision roundways.
  • Welding Motivation carriage control
  • 2” pneumatic torch lifter
  • 2” vertical x 3” horizontal manual cross slides
  • Water cooled mandrel
  • Copper backup bar
  • Currently equipped with a Lincoln Tig 300/300 power supply
  • Shipping Dimensions: 11’ long x 3’ wide x 6 ½’ high
  • Shipping weight: 4,700 lbs.
  • Serial #N/A
S161003 Pandjiris Model 72 E-6/30 72” External Seam Welder
  • 72" welding length
  • 78” clamping length
  • 6" – 56” external diameter capacity, with included 20 ½” riser
  • .020 - 3/8" material thickness capacity
  • Lincoln Model TC-3 carriage .1 to 100 ipm variable speed.
  • Lincoln NA-3 carriage and welding control
  • Lincoln manual 4” vertical torch adjuster
  • 3” wide aluminum fingers (No copper tips)
  • Water cooled mandrel
  • Pneumatic mandrel latch
  • Dual pneumatic foot pedals for clamping control
  • 90 psi pneumatic air bags
  • Serial # 800-2743-1
  • Shipping weight: 4,500 lbs.
  • Shipping dimensions : 10 1/2' long x 4' wide x 8 1/2' high
S110104P Ameco 72” Seam Welder 
  • 72” total welding/clamping length capacity 
  • 10” minimum part diameter capacity
  • 40” maximum part diameter capacity
  • Linde OM-48 rack and pinion driven carriage
  • Currently equipped with a Miller Deltaweld 451
  • Automatic 1A and 4-roll wire feed head
  • Serial #5640 
S611019P Pandjiris Model #572 72” Weld Seamer 
  • 78” welding/clamping length capacity
  • 5” minimum part diameter
  • 32” maximum part diameter (can be increased with a riser)
  • Variable speed rack and pinion driven carriage
  • Serial #25-1046
S131022 Airline LWS-72 72” Seamer/Side Beam 
  • 78” total welding/clamping length
  • 6” minimum part diameter
  • 56” maximum part diameter (currently has a 25” high riser that can be removed)
  • Equipped with om-48 variable speed carriage
  • J governor
  • Digimatic 2 control and wire feeder
  • 4 ½ inch manual horizontal and vertical adjustment slides
  • 5” pancake swivel for torch angle adjustment
  • Gas purged back up bar
  • Cable hanger
  • VI-450A power supply
  • Welding equipment not included
  • Serial # X91R-2220
S131024 Guild Model WS 150 72 72” Seamer/Coil Joiner/Planisher              
  • 72” Welding/clamping length capacity
  • Hydraulic entry pinch rolls 6” x 88”
  • 3/8” maximum weld capacity
  • Hydraulic sheet hold down
  • Acme screw driven linear bearing tray for torch movement
  • Hydraulic full weld length planisher to smooth out and strengthen the weld. Maximum planishing .135”
  • Hydraulic support tray for exiting piece
  • Hobart cyber-TIG 300 DCS welder
  • Job # cs-7881
S131118P Webb Model J-80 80” Welding Seamer
  • 80” clamping/welding length capacity
  • 7” minimum part diameter capacity
  • 40” maximum part diameter capacity with 13” riser
  • Pneumatic powered clamping fingers
  • Gas purged back up bar
  • Water cooled mandrel
  • Bug-O Mark 3 variable speed tractor and track
  • 115 volt
  • Serial # 6428
S912008 Webb Model J-80 80” Welding Seamers                                              
  • 80” clamping/welding length capacity
  • 6” minimum part diameter capacity
  • 32” maximum part diameter capacity
  • Rack and pinion driven variable speed carriage
  • Cable tray
  • Water cooled back up bar
  • 6” manual cross slides
  • Welding equipment NOT included
  • Serial #7270
S160906 Pandjiris Model 784 84” External Seam Welder
  • 84" welding length
  • 92” clamping length
  • 7" – 36” external diameter capacity
  • 6” wide individual aluminum fingers with copper tips
  • Fingers are pneumatically actuated
  • OM-48 variable speed carriage. .1-100 IPM
  • 6” Manual horizontal slide
  • Water cooled mandrel
  • Mandrel manually rotates 360 degrees
  • Mandrel has four machined flats for different material back up bars
  • 460V / 3 phase
  • 90 psi pneumatic air bags
  • Serial # 25-1275
  • Shipping weight: 6,500 lbs.
  • Shipping dimensions: 11' long x 4' wide x 7' high
S160813 Jetline Model LWS-96 External Seam welder
  • 96" welding length
  • 102” clamping length
  • 7 1/2" – 31” external diameter capacity (A riser can be added to increase capacity)
  • 3” Wide individual aluminum hold down fingers w/ copper tips (Pneumatically actuated)
  • Dual pneumatic foot pedals for clamping control
  • Jetline rack and pinion carriage (3 to 116 IPM)
  • Jetline 9101D Weld sequence control 
  • Jetline ALC-101 Arc length control and 6” actuator
  • Jetline CWF-10A cold wire feeder
  • 6” Manual Horizontal slide
  • Weldcraft 500 amp Tig torch: Model 525
  • Miller Syncrowave 351 power supply
  • Water cooled mandrel
  • 115V
  • 90 psi pneumatic air bags
  • Serial # 930359
  • Shipping weight: 7,000 lbs.
  • Shipping dimensions: 12' long x 3' wide x 7' high
  • Good Condition
S130503 Pandjiris Model 96-E8-36 96” Seam Welder
  • 96” total welding/102”clamping length capacity
  • 8” minimum part diameter capacity 
  • 36” maximum part diameter capacity (diameter capacity can be increased with a riser)
  • Jetline rack and pinion driven carriage and control with Esab “J’ Governor control
  • Digimatic 2 weld control
  • 4 roll wire feed head
  • 4” vertical powered slide and 4” horizontal manual torch adjustment slides
  • Water cooled mandrel
  • Esab SVI 300i power supply
  • Serial #400-1344
  • Shipping weight: 7,000 lbs.
  • Shipping dimensions: 12' long x 4' wide x 8' high
S100711 Cecil Peck 8’ Weld Seamer                                                                       
  • 96” total welding/clamping length capacity
  • 8” minimum part diameter capacity
  • 42” maximum part diameter capacity (can be increased with a riser)
  • Variable speed rack and pinion driven carriage
  • Welding equipment NOT included
  • Serial #N/A
S910003P Pandjiris / Hobart 8’ Vertical Variable Polarity Seamer 
  • System includes an  integrated Hobart VP-300S  power supply
  • Gas control unit
  • 8’ x 8’ manipulator and 8’ vertical seamer bed
  • 4-roll wire feeder and all welding equipment
  • Detailed specification sheet available
S130201 Amet / Jetline 8’ Vertical Variable Polarity Seamer 
  • System includes an Amet controller & operating console
  • Amet Motor control center
  • An integrated Miller Dynasty 700 power supply
  • Custom gas control unit
  • 8’ x 8’ manipulator and 8’ vertical seamer bed
  • 4-roll wire feeder and all welding equipment
  • Excellent for welding Aluminum
  • Purchased New in 2002 for OVER $300,000
S912009 Webb Model J-104 104” Welding Seamer 
  • 104” clamping/welding length capacity
  • 8” minimum part diameter capacity
  • 32” maximum part diameter capacity
  • Rack and pinion driven variable speed carriage
  • Cable tray
  • Water cooled back up bar
  • 6” manual cross slides
  • Welding equipment NOT included
  • Serial #9X106A
S140926 Airline 10’ Seam Welder                                    
  • 126” clamping length                                                                     
  • 32” in diameter capacity
  • 3" individual fingers with copper tips
  • Rack and pinion variable speed carriage
  • Cable tray
  • Two mandrel supports
  • Riser can be added to increase diameter capacity
     
  • Shipping dimensions: 15' long x 5' wide x 8' high
  • Shipping weight: 12,000 lbs.
S130906P Cloos 10’ Flat Plate/Cylinder Seam Welder 
  • 120” total welding/clamping length capacity
  • 20” minimum inside diameter
  • 54” maximum outside diameter
  • Cloos MIG welding package includes: GLC 503 Quinto power supply
  • CK 78 DISD control
  • Hydraulic tilting mandrel with powered rotation to change from flat plate to cylinders
  • 2 Roller top hydraulic lift tables with pneumatic lifting arms (32” x 100” and 58” x 85”)
  • 5' x 10' riser platform
  • Foot pedal controlled pneumatic mandrel latch
  • Pneumatic torch alignment/adjustment
  • Swing out control arm
  • Gas purge back-up bar
  • Serial #N/A
S111104 O’Connor Model 138 11 1/2’ Internal / Flat Sheet Seamer
  • 138” welding/clamping length
  • .020 to 3/8” clamping range
  • For flat sheet or I.D. welding on cylinders with a 24” minimum I.D.
  • KAT Model GK-166 variable speed travel carriage and Model GRC-68 control
  • Lincoln LN-4 Sub arc welding system w/ flux hopper
  •  27” mandrel height
  • Dual arm pneumatic clamping
  • Serial #N/A
S160810P Pandjiris Model 144-E External/ Flat Sheet Seam welder
  • 144" welding length
  • 150” clamping length
  • 14" – 103” external diameter capacity with current 30” and 43” risers
  • 3” Wide individual aluminum hold down fingers (Pneumatically actuated)
  • Dual pneumatic foot pedals for part clamping control
  • Model 15-3 VSC rack and pinion carriage (3 to 116 IPM)
  • Jetline 9500 Weld control 
  • Jetline ALC-101 Arc length control and actuator 
  • Jetline CWF-10A cold wire feeder
  • 6” Manual Horizontal slide
  • Gas purged backup bar
  • Model 300 Thermal Arc Plasma Torch
  • Cable track and tray for cable management
  • 2,000 lb. lift table with 17” x 144” wood lifting rails
  • Minimum lift height of 40 1/2” with lifting rails
  • Lift table has V-track wheels (Track not included)
  • 115V
  • 90 psi pneumatic air bags
  • Serial # N/A
  • Shipping weight: 9,500 lbs.
  • Shipping dimensions: 17 ' long x 4' wide x 9' high
  • Very Good Condition 
 S151202P Jetline Model LWC-144 12' Hydraulic Elevation Internal/External Seamer
  • 148" total welding/clamping length capacity
  • 12.5" minimum external diameter capacity, 48" minimum internal diameter capacity
  • 8' maximum external diameter capacity
  • Rack and pinion driven variable speed carriage
  • 5" motorized remote controlled cross seam adjuster
  • water cooled mandrel
  • Plate alignment devices
  • Cable track and tray
  • Jetline ALC-301-V12F95 arc length control
  • Jetline cold wire feeder with motorized remote controlled feed head adjustments
  • Jetline Vision camera system with 16" viewer
  • Welding equipment includes a Thermal Arc weld control and a Miller Goldstar 452
  • Serial #200738
  • Shipping weight - 14,500 lbs
  • Shipping Dimensions - 25' long x 7' wide x 12' high

 

S150807P Pandjiris Model 168E-11-60-S, 14' External Seamer
  • 174" total welding/clamping length
  • 11" minimum diameter capacity
  • 24" maximum diameter capacity (can be increased with a riser)
  • 3 to 116 IPM variable speed, rack and pinion driven carriage
  • Pandjiris EZ link carriage control
  • 5" manual front torch slide, 10" manual rear torch slide
  • 7" horizontal manual slide
  • Water cooled mandrel
  • Cable tray for all cables
  • Plate alignment device
  • Currently equipped with a Miller D-64M dual wire feeder
  • Shipping weight - 10,500 lbs.
  • Shipping dimensions - 23' long x 5' wide x 7' high
  • Serial #10226E00
S150608 Pandjiris Model 168I/50FS 14' Internal/Flat Sheet Seamer
  • 174" total welding/clamping length capacity
  • 50" minimum internal diameter capacity
  • .020 - 3/8" material thickness capacity
  • .1 to 100 IPM variable speed Model OM-48 rack & pinion driven carriage
  • 2' manual vertical & horizontal torch adjusters
  • Water cooled mandrel
  • Cable tray to carry all cables
  • Serial #n/a
  • Shipping weight: 16,000 lbs.
  • Shipping dimensions: 24' long x 5' wide x 5' high
S140406P Binzel 20’ Flat Sheet/ Internal/External Weld Seamer              
  • 240” welding/clamping length
  • 1/4 to 1 1/2” clamping range
  • Flat sheet welding
  • Internal welding 8' minimum diameter shell
  • External welding 24” -32” diameter
  • Binzel variable speed dual rack and pinion travel carriage
  • 8” pneumatic vertical slide to raise torch
  • 1 1/2” manual vertical and horizontal slides for torch fine adjustment
  • 3/4” manual vertical and horizontal for wire guide fine adjustment
  • Individual 4” wide aluminum fingers with replaceable copper tips
  • Automatic pneumatic mandrel lock
  • Dual manual worm gear finger adjusters
  • Gas purged back up bar
  • Replaceable 4' back up bar sections
  • Automatic Pneumatic plate alignment bar
  • 460 volt
  • Serial #N/A
S121105P Pandjiris Model 240 FS 20’ Flat Sheet Seamer                                
  • 246” welding/clamping length 
  • 1/4 to 1 1/2” clamping range
  • For flat sheet welding
  • Lincoln model TC-3 variable speed travel carriage
  • Lincoln NA-3 submerged arc welding system with 4” manual vertical slide
  • Individual 6” Aluminum fingers
  • Water cooled mandrel
  • Height of mandrel is 24 1/2”
  • 115 volt
  • Serial # 651-3822
  • Welding Equipment Not Included
 

January | February | March | April | May | June | July
August
| September | October | November | December


513.941.4411 - 1.800.288.9414 - Fax 1.513.467.3585
sales@usedweldingmachinery.com
Send mail to webmaster@usedweldingmachinery.com 
with questions or comments about this web site.
Site Map
Copyright © 1996-2017 Weld Plus Inc.
Last modified: May 1, 2017