Used  Welding Machinery Monthly Sales Products Special Sales Contact Us Site Map

 

Subarc Manipulator Column Booms

used welding manipulators

M409001 Lincoln Model H-600 26” x 48” Manipulator Constant speed power reach from 24” to 50” Screw driven constant power elevation from 12” to 60” Lincoln dc-600 power supply and a NA-5 submerged arc control and head Lincoln manual horizontal and vertical adjusters All mounted on a variable speed travel car with 40’ of track Serial # W7702-0270

M150401 Pandjiris Model 1600 fixed height manipulator with travel car Fixed height of 84" to the bottom of the boom 1,100 lb. capacity either or both ends 3 to 116 IPM variable speed reach from 40" to 196" from the center of the mast Mounted on a manual travel car that runs on 112" wide track (not included) 460 volt Shipping weight 7,450 lbs. Shipping dimensions: 21' long x 9.5' wide x 10.5" high Serial #25-3702

M130611 Capital Model 4’ x 2’ Manipulator/Travel Car 4’ constant speed powered lift from 36” to 84” with 22” travel car riser Manual reach from 8” to 32” from the center of mast rotation Manual king pin base Manual v-groove wheel travel car riser 115 volt Serial #N/A

M130612 Capital Model 4’ x 2’ Manipulator/Travel Car  4’ constant speed powered lift from 36” to 84” with 22” travel car riser Manual reach from 8” to 32” from the center of mast rotation Manual king pin base Manual v-groove wheel travel car riser 115 volt Serial #N/A

M130613 Capital Model 4’ x 4’ Manipulator/Travel Car 4’ constant speed powered lift from 32” to 80” with 10” travel car riser Manual reach from 10” to 58” from the center of mast rotation Manual king pin base Manual v-groove wheel travel car riser 115 volt Serial #N/A

M606017 Ransome Model 44 4’ x 4’ Manipulator / Travel Car 4’ constant speed powered lift from 25” to 73” Manual reach from 9” to 57” from the center of mast rotation Manual king pin base Manual travel car 115 volt Serial #0526806

M130102 Ransome Model 44 4’ x 4’ Manipulator 4’ constant speed powered lift from 32” to 80” Reconditioned Manual reach from 9” to 57” from the center of mast rotation 150 lb. Capacity at either or both ends Reconditioned w/existing equipment Manual king pin base Manual travel car 4” vertical and 2” horizontal manual slides Lincoln na-3n submerged arc welding system · Welding equipment not included 115 volt Shipping weight 1,850 lbs. Serial # 0525908

M121207 Aronson Model 44 4’ x 4’ Manipulator / Travel Car 4’ constant speed powered lift from 25” to 73” Reconditioned Manual reach from 9” to 57” from the center of mast rotation 150 lb. Capacity at either or both ends Manual king pin base Manual travel car 2” vertical and 2” horizontal manual slides · Welding equipment not included 115 volt Serial # 7934-MKMT  

M140304P Ransome Model 99 54” x 54" Manipulator 54” manual Lift from 56” to 110” to the center of the boom to floor 54” variable speed powered reach from 51” to 105” to the center of the mast 360° manual rotation 500 lb. capacity 60” x 90” steel base Miller cladding system System includes: Miller Automatic A1D-DW control, A1D-4L 2 roll feeder, and 60 MM strip head and spool holder 15” Vertical powered slide 3” vertical manual slide for fine adjustment 2 manual head adjusters and 360° swivel 115 volt Serial #N/A · Reconditioned 230 or 460 Volt

M908003P Ransome Model 1212 4’ x 8’ Manipulator and Travel Car with Track 4’ constant speed lift from 57.75” to 105.75” 1 to 62 IPM variable speed reach from 27” to 122” 360° manual mast rotation 5 to 200 IPM Variable speed travel car that runs on 70’ (2 sections 20’, 3 sections 10’) of 33 gauge track Currently equipped with 4 Lincoln DC-600 power supplies 2 Lincoln NA-3N controls with feed heads Vertical and horizontal adjusters for each weld head all mounted on manual spotting cars mounted on the manipulator boom and an Invincible flux recovery system 230 volt Serial #629592

M140303P Herrick 5’ x 7’ Manipulator 5’ constant speed power lift from 24” to 84” to the center of the boom 7’ variable speed power reach of 1.8 to 180 IPM from 15” to 99” from the center of the mast 250 lb. weight capacity 360° manual rotation on 5' x 5' free standing Base has level adjustment screws at all four corners Miller submerged-arc weld system: automatic 2 control, A2-4L 4 roll two speed feeder and flux hopper Pendant control Serial # 72-8031

M404010 Ransome Model 99 6’ x 4’ Manipulator 6’ constant speed powered lift from 36” to 108” Fixed boom with powered carriage Carriage travel is 44” to 92” from the center of mast rotation 500 lb. capacity 5' x 13' base with power supply mount 460 volt Serial #9526552

M140401P Cayuga 6’ x 4’ Manipulator/Travel Car  6’ constant speed power lift at 34 IPM from 19 1/2” to 91 ½” to the center of the boom 4’ variable speed power reach of 1.8 to 180 IPM from 13” to 61” from the center of the mast 250 lb. weight capacity 360° manual rotation on variable speed travel car with dual tank rack Jetline HWF-200D/CWF-10A wire feed system Jetline HWF-200D Hot wire power supply and 9302B control ALC 101 Arc length control system with 6” powered vertical slide Thermal Dynamics plasma welding system: PS-3000 power supply, WSE control package, WC 100B circulator Pendant Control Serial # 25A947

M121223 Bartley 6’ x 6’ Manipulator 6’ constant speed acme screw driven lift from 32” to 104” Reconditioned Powered reach from 13” to 85” from the center of mast rotation 200 lb. capacity at either or both ends Fixed King Pin base 115 volt Shipping weight 2,000 lbs. Serial #N/A

M904018 Ransome Model XXHD 7’ x 15’ Travel Car Manipulator As Is 7’ powered elevation from 77” to 164” to the bottom of the boom Reconditioned 2.7 to 108 IPM variable speed reach from 64” to 244” from the center of the mast rotation 360° power mast rotation 2,000 lb. load capacity either or both ends Mounted on a variable speed travel car that runs on 84” gauge rail track Track NOT Included 460 volt Serial #909286

M309004 Mark "V" 8' x 5' Manipulator and Travel Car 8' constant speed power elevation from 32" to 128" 5' variable speed power reach from 15" to 75" Manual mast rotation 6" Linde powered horizontal and vertical cross slides and a manual rotary slide All mounted on a manual travel car that runs on inverted angle iron track (track not included) Currently equipped with a l-Tec 650 cc/cv power supply GMA feed head and all cables Remote control console for all functions including welding process Serial #6620-34-31

M141001 Aronson Locust 8’x 8’ Welding Manipulator 300 lb. weight capacity on either or both ends Constant speed, powered lift from 30” to 126” Powered reach from 34’ to 110” at 3.3 to 100 IPM Manual mast rotation NA-5 submerged arc welding package Portable X-base 20’ pendant control 115 volt – 1 phase DC-600 Serial # u1960607124 Arco wand 7DMH flux recovery Shipping dimensions: 140”Lx6’Wx140”H Shipping weight: 3,000 lbs.

M130604 Cecil Peck 8’ x 10’ Used Welding Manipulator 8’ constant speed powered lift from 18” to 114” with welding equipment Powered reach from 43” to 163” from the center of mast rotation 500 lb. capacity at either or both ends 360° bolt down swivel base Lincoln NA-3 Submerged Arc system. System includes NA-3 head, control, flux hopper, coil adapter, cables and DC-600 power supply 460 volt Shipping weight 2,500 lbs. Serial #N/A

M140912P Aronson 8’ x 12’ Manipulator 300 LB. WEIGHT CAPACITY EITHER OR BOTH ENDS Constant Speed Powered lift from 29” to 125” Manual mast rotation 3.3 to 100 IPM Variable speed reach from 15 ½” to 159 ½” from center of boom X-frame base 2 Lincoln Powerfeed 10A 2 Pandjiris 615 slides Weld Engineering HAMX-50 flux hoppers 460 volt – 3 phase Serial # 9692 Shipping dimensions: 14’Lx8’Wx3’H Shipping weight: 3,000 lbs.

M130202 Pandjiris C 10’ x 6’ Manipulator and Travel Car with Track 500 lb. capacity at either or both ends 10’ constant speed lift from 38” to 157” to the bottom of the boom when mounted on travel car 6’ variable speed reach from 54” to 126 ” from the center of the mast 1 to 62 IPM speed 360° manual king pin base on powered 56 1/2 gauge travel car 45’ of track 5 to 200 IPM 4’ x 7’ bolt on shelf to carry 2 welders Cable track for travel car 460 volt Serial # 25-3794

M130717 Pandjiris Series 1400 11’ x 14’ Travel Car Manipulator  w/travel car 11’constant speed powered lift from 42” to 174” Variable speed rack & pinion driven reach from 28” to 196” 360° manual mast rotation Mounted on a Model 30565 variable speed travel car that runs on 56 1/2” gauge track (track NOT included) Pandjiris 61P power slides 6” horizontal and vertical powered adjustment Lincoln NA-3N sub arc welding system Lincoln DC-1000 power supply and Invincible flux recovery unit 460 volt Serial # 800-6743-2

M140911 Ransome Model 1212 12’ x 12’ Manipulator 750 lb. weight capacity either or both ends 12’contant speed powered lift from 39 ½” to 183 ½” to the center of the boom 12’, 3.35 IPM to 134 IPM variable speed powered reach from 30 ½” to 174 ½” to the center of the boom 360° manual mast rotation on a bolt down base 20’ pendant control Currently equipped with a 10’ boom extension, Lincoln NA-3 and NA-4 controls and heads 460 volt – 3 phase Shipping dimensions: 20’Lx8’Wx5’H Shipping weight 9,000 lbs. Serial # 6219826

M140913 Ransome Model 1212 12’ x 16’ Manipulator  750 lb. weight capacity either or both ends 12’contant speed powered lift from 39 ½” to 183 ½” to the center of the boom 16’, 3.35 IPM to 134 IPM variable speed powered reach from 30 ½” to 222 ½” to the center of the boom 360° manual mast rotation on a bolt down base Currently equipped with a 6’ boom extension, Lincoln NA-3 and NA-4 controls and heads Pandjiris 6” powered vertical slide 460 volt – 3 phase Shipping dimensions: 22’Lx8’Wx5’H Shipping weight 9,000 lbs. Serial # 6219310  

M111103 Pandjiris 12’ x 12’ Model SWHM Travel Car Manipulator 12’constant speed powered lift from 48” to 192” w/travel car Variable speed rack & pinion driven reach from 24” to 168” 360° manual mast rotation Mounted on a variable speed travel car that runs on 56 1/2” gauge track (track NOT included) Lincoln NA-3 sub arc welding system and Arc Wand flux recovery unit 575 volt Serial # 25-1739

M131115P Aronson Locust-II 12’x 12’ Manipulator 300 lb. capacity at either or both ends 12’ variable speed lift from 37” to 181” 12’ variable speed reach from 15 1/2” to 195 1/2” from the center of the mast 1 to 62 IPM speed 360° manual mast rotation with pneumatic brake 360° welding head swivel Cable protection sleeve mounted on top of boom Pendant control for all functions 460 volt Serial # 9586

M131011 Aronson Scarab I 12' x 12' Manipulator 12' constant speed rack & pinion driven lift from 40.5" to 184.5" 12' variable speed rack and pinion driven reach from 18" to 162" 500lb load capacity either or both ends Manual mast rotation Mounted on a portable "X" frame base 480 volt 3 phase Serial #2984  

M100530P Webb MB1212 12’ x 12’ Travel Car Manipulator 12’ constant speed screw driven powered lift from 51” to 195” Variable speed rack & pinion driven reach from 32” to 176” 360° manual mast rotation Mounted on a variable speed travel car that runs on 56-1/2” gauge track (track NOT included) 230 or 460 volt Serial #7042

M150421 Ransome Model XHD 13' x 18' manipulator 1,500 lb. capacity either or both ends 3.4 to 136 IPM variable speed reach from 47" to 16' 11" from the center of the mast Constant speed lift from 37" to 21' 1"to the bottom of the boom 6' x 12' floor mount base plate 460 volt Shipping weight 22,000 lbs. Shipping dimensions: 26' long x 7' wide x 12' high Serial #639759

M131013 Aronson Scarab I 14' x 14' Manipulator 14' constant speed dual rack & pinion driven lift from 38.75" to 206.75" 14' variable speed rack and pinion driven reach from 18" to 186" 900 lb. load capacity either or both ends Manual mast rotation Mounted on a portable "X" frame base 480 volt - 3phase Serial # 81268

M710002 Ransome Model XXHD 13.5’ x 18’ Travel Car Manipulator 13.5’ powered elevation from 77-1/2” to 239-1/2”” to the bottom of the boom 2.7 to 108 IPM variable speed reach from 55” to 271” from the center of the mast rotation 360° power mast rotation 2,000 lb. load capacity either or both ends Mounted on a variable speed travel car that runs on 84” gauge rail track Track NOT Included 460 volt Serial #639089 Reconditioned to fit your needs

M120125 Ransome Model XHD 16’ x 16’ Manipulator 2008 Model 16’ constant speed power lift at 36 IPM from 53” to 242” to the center of the boom 16’ variable speed power reach of 1.8 to 180 IPM from 40” to 232” from the center of the mast 1500 lb. weight capacity either or both ends 360° Powered Rotation on Variable Speed travel car Travel car uses 84 ½ gauge train rail Rail not included Lincoln Tiny Twin arc welding system includes with Powerwave AC/DC 1,000 Dual wire drum holder Servo robot 6” vertical and horizontal powered slides and laser seam tracking system Arc Wand flux recovery system 575 volt Serial # 45238 Shipping weight 44,000 lbs.


January | February | March | April | May | June | July
August
| September | October | November | December

513.941.4411 - 1.800.288.9414 - Fax 1.513.467.3585
sales@usedweldingmachinery.com
Send mail to webmaster@usedweldingmachinery.com 
with questions or comments about this web site.
Site Map
Copyright © 1996-2017 Weld Plus Inc.
Last modified: January 3, 2017