Current Inventory - Welding Positioners, Manipulators, Turning Rolls, Floor Turntables

Any MBC BP 2A "NEW" M.B.C. Model BP-2-A, 200 lb Bench Top Positioners. 0-4.5 RPM Capacity 200 lbs balanced load in the horizontal position, 100 lbs in the vertical. 12" dia. slotted faceplate. Variable Speed Rotation, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. Available with 3-Jaw 9" Quick Lever Chuck. "New"Optional Chuck

Any MBC BP 2B "NEW" M.B.C. Model BP-2-B, 200 lb Bench Top Positioners. 0-9 RPM Capacity 200 lbs balanced load in the horizontal position, 100 lbs in the vertical. 12" dia. slotted faceplate. Variable Speed Rotation, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. "New" Available with 3-Jaw 9" Quick Lever Chuck.

Any MBC BP SB "NEW" M.B.C. Model BP-SB, 100 lb Bench Top Positioners. 0-18 RPM Capacity 100 lbs balanced load in the horizontal position, 50 lbs in the vertical. 12" dia. slotted faceplate. Variable Speed Rotation, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. "New" Available with 3-Jaw 9" Quick Lever Chuck.

Any MBC R2 Model R2, 200 lb Bench Top Positioners with a 2" thru hole design. These are "New" welding positioner in stock. Capacity 200 lbs balanced load with the part in the horizontal position, table vertical. 100 lbs with the part in the vertical position weld table flat. 13" dia. slotted faceplate 5/16th thick with 2" thru hole. Variable Speed Rotation 0-6 RPM, 102 in lb torque, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. "New" Available with 3-Jaw 9" Quick Lever Chuck.

Any MBC R2 Model R2, 200 lb Bench Top Positioners with a 2" thru hole design with optional AGP- 2 Through Hole Purge. These are "New" welding positioner in stock. Capacity 200 lbs balanced load with the part in the horizontal position, table vertical. 100 lbs with the part in the vertical position weld table flat. 13" dia. slotted faceplate 5/16th thick with 2" thru hole. Variable Speed Rotation 0-6 RPM, 102 in lb torque, H.F. Protected, On/off Foot Switch, Manual Hand wheel Tilt, 115 volt. "New"

Any PRO WP250 "New" Profax 250 lb Positioner. 250 lb Capacity @ 4" C.G., 0 to 90 Degree Manual Hand Wheel Tilt. Variable Speed Rotation from 0.0 to 5.5 RPM. 13.75" Diameter Table with Slots and a 1" Diameter Thru Hole. High Frequency Protected. On/Off Foot Pedal. 115 Volt Brand New – Ready to Ship !!

PAN MP “NEW” Pandjiris Mini Pro 350 lb Bench Top Positioner. 350 lb Horizontal Capacity, 350 lb Vertical Capacity. Variable Speed from .37 to 13.0 RPM. 0 to 90 Degree Manual Pin Lock Tilt in 15 Degree Increments. 8” Diameter 3-Jaw Self Centering Chuck with a 2.5” Thru Hole. On/Off Foot Switch. 115 Volt. Shipping weight 105 lbs. Brand New – Ready to Ship!

Any PRO WP500 "NEW" Profax 500 lb Positioner. 500 lb Capacity @ 6" C.G., 135 Degree Power Tilt. Variable Speed Rotation from 0.4 to 4.0 RPM. Fixed Table of 25.25". 19.5" Round Table with Slots. 300 Amp Rotary Ground Forward/Reverse Momentary Foot Pedal. 115 Volt Brand New – Ready to Ship!

IRC 750 4FB “NEW” Irco Automation 750 lb Positioner. 750 lb capacity @4” c.g., 135 degree power tilt. .01 to 4.8 variable speed rotation. 21.5” fixed table height. 22” square table with slots. 400 amp copper rotary ground. Pendant control. On/Off foot pedal. 115 volt. Shipping weight 390 lbs. NEW !!! – In Stock

Any PRO WP1000 "NEW" Profax 1,000 lb Positioner. 1,000 lb Capacity @ 6" C.G., 135 Degree Power Tilt. Variable Speed Rotation from 0.2 to 2.0 RPM. Fixed Table of 33.75". 24.5" Round Table with Slots. 500 Amp Rotary Ground Forward/Reverse Momentary Foot Pedal. 115 Volt Brand New – Ready to Ship!

Any IRC 15 4FB "NEW" Irco Automation 1,500 lb Positioner. 1,500 lb capacity @ 4" c.g., 135 degree power tilt. .06 to 3.0 variable speed rotation. 23" fixed table height. 24" octagon table with slots. 400 amp copper rotary ground. Pendant control. On/off foot pedal. 115 volt. NEW !!

Any IRC 15 4AB "NEW" Irco Automation 1,500 lb Positioner. 1,500 lb capacity @ 4" c.g., 135 degree power tilt. .06 to 3.0 variable speed rotation. Manual adjustable table height from 23" to 37" in 7" increments. 24" octagon table with slots. 400 amp copper rotary ground. Pendant control. On/off foot pedal. 115 volt. NEW !!

Any PAN 15 4FB "NEW" Pandjiris 1,500 lb Positioner. 1,500 lb Capacity @ 4" C.G., 135 degree Manual Hand Wheel Tilt, Variable Speed Rotation from .08 to 1.60 RPM. 23-1/4" Fixed Table Height. 24" Square Table with Slots. 25' Pendant Control. 115 Volt. PROUDLY MADE IN THE U.S.A. NEW !! - Optional Forward/Stop/Reverse Foot Pedal Optional Variable Speed Foot Pedal

Any PAN 15 4AB "NEW" Pandjiris 1,500 lb Positioner. 1,500 lb Capacity @ 4" C.G., 135 Degree Constant Speed Power Tilt, Variable Speed Rotation from .08 to 1.60 RPM. Manual Adjustable Table Height from 23-1/2" to 37-1/2" in 7" Increments. 24" Square Table with Slots. 25' Pendant Control. 115 Volt. PROUDLY MADE IN THE U.S.A. NEW !! - Optional Forward/Stop/Reverse Foot Pedal Optional Variable Speed Foot Pedal

Any PRO WP2000 "NEW" Profax 2,000 lb Positioner. 2,000 lb Capacity @ 12" C.G., 135 Degree Power Tilt. Variable Speed Rotation from 0.2 to 2.0 RPM. Fixed Table of 33.75". 24.5" Round Table with Slots. 500 Amp Rotary Ground Forward/Reverse Momentary Foot Pedal. 230 Volt Brand New – Ready to Ship!

Any PAN 30 6FB "NEW" Pandjiris 3,000 lb Positioner. 3,000 lb Capacity @ 6" C.G.., 135 Degree Constant Speed Power Tilt, Variable Speed Rotation from .07 to 1.40 RPM. 32-5/8" Fixed Table Height. 30" Square Table with Slots. 25' Pendant Control. 460 Volt in stock. 230 volt available on request. PROUDLY MADE IN THE U.S.A. NEW !!

Any PAN 30 6AB "NEW" Pandjiris 3,000 lb Positioner. 3,000 lb Capacity @ 6" C.G., 135 Degree Constant Speed Power Tilt, Variable Speed Rotation from .07 to 1.40 RPM. Manual Adjustable Height from 33" to 53" in 4" Increments. 30" Square Table with Slots. 25' Pendant Control. 460 Volt in stock. 230 volt available on request. PROUDLY MADE IN THE U.S.A. NEW !!

Any IRC 30 6FB "NEW" Irco Automation 3,000 lb Positioner. 3,000 lb capacity @ 6" c.g., 135 degree power tilt. .05 to 2.0 variable speed rotation. 29" fixed table height. 36" octagon table with slots. 600 amp copper rotary ground. Pendant control. 460 volt. NEW !!!

Any IRC 30 6AB "NEW" Irco Automation 3,000 lb Positioner. 3,000 lb capacity @ 6" c.g., 135 degree power tilt. .05 to 2.0 variable speed rotation. Manual adjustable table height from 23" to 37" in 7" increments. 36" octagon table with slots. 600 amp copper rotary ground. Pendant control. 460 volt. NEW !!!

Any GEN PT1500V "NEW" Gentec Model PT-1500V 3,300 lb Positioner. 3,300 lb Capacity @ 15" C.G., 135 degree power tilt, Variable speed rotation from 0.1 to 1.0 RPM. Fixed height of 39" With the table flat. 31" diameter round table with mounting slots. 800 amp grounding capacity. Hand pendant control. On/Off foot control. 230/460 volt NEW in Stock!! Ready to Ship

Any PAN 45 12AB "NEW" Pandjiris 4,500 lb Positioner. 4,500 lb Capacity @ 12" C.G., 135 Degree Constant Speed Power Tilt, Variable Speed Rotation from .03 to .97 RPM. Manual Adjustable Height from 39" to 57" in 4-1/2" Increments. 48" Square Table with Slots. 25' Pendant Control. 230 or 460 Volt PROUDLY MADE IN THE U.S.A. NEW !!

IRC 45 12AB “NEW” Irco Automation 4,500 lb Positioner. 4,500 lb capacity @ 12” c.g., 135 degree power tilt. .03 to 1.2 variable speed rotation. Manual adjustable table height from 40” to 56” in 4” increments. 42” square table with slots. 600 amp copper rotary ground. Pendant control. On/Off foot pedal. 460 volt. Shipping weight 2,850 lbs

Any ARO HD45 "NEW" Koike-Aronson Model HD-45 4,500 lb Positioner. 4,500 lb capacity @ 12" C.G., 135 degree constant speed power tilt, Variable speed rotation from .04 to 1.2 RPM, Manual adjustable table height from 34.5" to 54.5" in 5" increments. 36" square table with slots. Pendant control for all functions.460 volt,3-phase. NEW!!

Any ARO HD60 "NEW" Koike-Aronson Model HD-60 6,000 lb Positioner. 6,000 lb capacity @ 12" C.G., 135 degree constant speed power tilt, Variable speed rotation from .05 to 1.5 RPM, Manual adjustable table height from 44.5" to 74.5" in 6" increments. 48" square table with slots. Pendant control for all functions. 460 volt,3-phase. NEW!!! -In Stock !

Any GEN PT3000 "NEW" Gentec Model PT-3000 6,600 lb Positioner. 6,600 lb Capacity @ 11.8" C.G.. 135 Degree Power Tilt, Variable Speed Rotation from 0.1 to 1.0 RPM. Fixed Height of 43" with the Table Flat. 39" Round Table with Mounting Slots. 800 amp Grounding Capacity. Hand Pendant Control. On/Off Foot Control. 230/460 Volt 3 Phase. NEW in Stock!! Ready to Ship !

Any ARO HD100 "NEW" Koike-Aronson Model HD-100 10,000 lb Positioner. 10,000 lb capacity @ 12" C.G., 135 degree constant speed power tilt, Variable speed rotation from .04 to 1.0 RPM, Manual adjustable table height from 44.5" to 66.5" in 6" increments. 48" square table with slots. Pendant control for all functions.460 volt,3-phase. NEW!!! - In Stock

Any GEN PT5000 "NEW" Gentec Model PT-5000 11,000 lb Positioner. 11,000 lb Capacity @ 11.8" C.G.. 135 Degree Power Tilt, Variable Speed Rotation from 0.04 to 0.8 RPM. Fixed Height of 47" with the Table Flat. 47" Round Table with Mounting Slots. 800 amp Grounding Capacity. Hand Pendant Control. On/Off Foot Control. 230/460 Volt 3 Phase. NEW in Stock!! Ready to Ship !

Any IRC 3JC20 NEW Model 3JC20 Quickset Pipe Chuck. Clamping Diameter. Outside 5/8" to 15-1/2", Inside Clamp. 5" to 20", Quick-Set of 3-Jaws w/Pins. Mounting not Included NEW !

Any PAN TJ-20 NEW Model TJ-20 Quickset Gripper Chuck. Clamping Diameter. Outside 1" to 16-1/2", Inside Clamp. 6-1/4" to 20", Quick-Set of 3-Jaws w/Pins. Mounting not Included NEW !

Any PAN MOD-A NEW Model "A" Quickset Gripper Chuck. Clamping Diameter. Outside 1-1/2" to 27-5/8", Inside Clamp. 5-1/2" to 31-1/4". Quick-Set of 3-Jaws w/Pins. Mounting Not Included NEW

Any IRC 3JC33 NEW Model 3JC33 Quickset Pipe Chuck. Clamping Diameter. Outside 5/8" to 28-1/2", Inside Clamp. 5" to 33". Quick-Set of 3-Jaws w/Pins. Mounting Not Included NEW !

Any PAN MOD-B NEW Model "B" Quickset Gripper Chuck. Clamping Diameter. Outside 1-1/2" to 40-3/4", Inside Clamp. 5-1/2" to 44-3/8". Quick-Set of 3 Jaws w/Pins. Mounting Not Included NEW !

Any PAN MOD-B-60 New Model "B-60" Quickset Gripper Chuck. Clamping Diameter. Outside 1-1/2" to 63-7/8". Inside 7" to 68". Quick-Set of 3 Jaws w/Pins. Mounting Not Included. NEW !

P810022 Aronson B-200Bench Mount Manual Positioner. 200 lb capacity @ 12” c.g., 360 degree manual rotation with friction breaking. 360 degree manual tilt with friction breaking. 360 degree manual revolving base. 6” diameter round table. 12.5” height. Serial #93873 Good Condition

1 ea P411006 WMP 300 lb Positioner. 300 lb Load Capacity. Constant Speed Rotation. 90 Degree Manual Tilt. 24" Fixed Height. 18" Diameter Table w/ Slots. On/Off Foot Pedal. 230/460 volt. Serial # N/A As Is Only!! – Good Working Condition

P810013 Aronson AW-300A Positioner. 300 lb capacity @ 12” c.g.. .2 to 6.0 RPM variable speed rotation. 360 degree manual tilt with brake and 45 degree pin lock indexing. 8” diameter round table. Forward/stop/reverse foot pedal. Pendant control. 120 volt. Serial #510-90179
Good Condition

P810014 Aronson AW-300A Positioner. 300 lb capacity @ 12” c.g.. .2 to 6.0 RPM variable speed rotation. 360 degree manual tilt with brake and 45 degree pin lock indexing. 8” diameter round table. Forward/stop/reverse foot pedal. Pendant control. 120 volt. Serial #n/a Good Condition

P810031 Aronson AW-300A Positioner. 300 lb capacity @ 12” c.g.. .2 to 6.0 RPM variable speed rotation. 360 degree manual tilt with brake and 45 degree pin lock indexing. 8” diameter round table. Forward/stop/reverse foot pedal. Pendant control. 120 volt. Serial #n/a Good Condition

1 ea P994007 Standard Machine Co. Positioner. Approx. 400# Capacity Power Hyd. Tilt, Variable Speed Rotation. 13" Dia. Table w/ Slots. Fixed Height of 26" Ctr. line of Rotation. AS IS ONLY

P809011 Irco Model .5 3X3 500 lb Positioner. 500 lb capacity @ 3” c.g.. 135 degree manual hand wheel tilt. Variable speed rotation from .05 to 2.4 rpm. Fixed height of 34.5” to the center of the rotational axis. 29.75” round table with slots. On/off foot pedal. 115 volt. Serial #10141.Good Condition

1 ea P407002 Pandjiris Alpha 5-V8 Positioner. 500 lb cap. @ 3" C.G., 90 Degree Manual Tilt with Pin Locks in 12.5 Degree Increments. Variable Speed Rotation from .27 to 6.70 RPM. 20.5" Fixed Height to the Center of the Rotational Axis. 18" Diameter Round Table w/ Slots. On/Off Foot Pedal. Serial #800-2073-2 Good Condition

1 ea P9911008 Aronson BT-500A Welding Positioner. 500 lb Cap. Variable Speed, Manual Side Arm Tilt, 8" Dia. 3-Jaw Chuck, Needs Vert. Mtg. Pipe. Foot Controls, Ser.#77785 Good Condition

P810015 Aronson BT-500 Positioner. 500 lb capacity @ 12” c.g.. .33 to 10.0 variable speed rotation by a Graham drive. 360 degree manual rotation with brake. 6” diameter round table. Forward/stop/reverse foot pedal. 120 volt. Serial #5348 Good Condition

1 ea P205004 Jetline Model ZB-500A Positioner. Capacity of 500 lbs @ 4". Variable Speed Rotation. Manual Hand Wheel Tilt. 24" Diameter Table. Good Condition

1 ea P711002 Ransome Model 5P 500 lb Positioner. 500 lb capacity @ 6" c.g.. Power tilt. Variable speed rotation from .05 to 2.0 RPM. Manual adjustable height from 32.5" to 50.5" in 6" increments. 30" round table with slots. Pendant control for all functions. Forward/Stop/Reverse foot pedal. 460 volt. Serial #138439. Good Condition

1 ea P409001 Ransome/Worthington 5P Positioner. 500 lb Capacity @ 6" C.G., Power Tilt, Variable Speed Rotation from .05 to 2.0 RPM. Manual Adjustable Table Height from 32-1/2" to 50-1/2". On/Off Foot Pedal. Includes a 12" Capacity 3-Jaw Self Centering Chuck. Serial #54055 Good Condition

1 ea T309002 Kistler / Pandjiris Model U-150 / U-150H Pipe Positioner with Clamping Roller System. 1" - 8" Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum Control. An Excellent System for Flange and Elbow Welding on Small Diameter Pipe. 115 Volt. Good Condition

T809008 Kistler / Pandjiris Model U-150 / U-150H Pipe Rotator with Clamping Roller
System. 1" - 8" Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum Control. An Excellent System for Flange and Elbow Welding on Small Diameter Pipe. 115 Volt. Serial #11002. Good Condition

T809009 Kistler / Pandjiris Model U-150 / U-150H Pipe Rotator with Clamping Roller
System. 1" - 8" Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum Control. An Excellent System for Flange and Elbow Welding on Small Diameter Pipe. 115 Volt. Serial #11011.Good Condition

T809010 Kistler / Pandjiris Model U-150 / U-150H Pipe Rotator with Clamping Roller
System. 1" - 8" Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum Control. An Excellent System for Flange and Elbow Welding on Small Diameter Pipe. 115 Volt. Serial #11013.Good Condition

1 ea P805026P Aronson Model D-10A 1,000 lb Positioner. 1,000 lb capacity @ 4" c.g.. 135 degree power tilt. Variable speed rotation from 0.0 to 3.25 rpm. Manual adjustable height from 17.75" to 32.125" in 7" increments. 24" round table with slots. Pendant control for all functions. 460 volt. Serial #8629-1 Good Condition

1 ea P411003P Aronson HD10B-PTVR2 Positioner. Capacity 1,000 lbs @ 6" C.G. Variable Speed Rotation from .07 to 2.0 RPM. With a 10 Turn Potentiometer. 135 Degree Power Tilt. Manual Adjustable Heights of 24", 32" and 39". 24" Diameter Round Table with Slots. Pendant Control. Serial #75326 Very Good Condition

1 ea P408001 Teledyne Readco Model UPC-10 Positioner. 1,000 lb Capacity @ 6" C.G.. Power Tilt, Variable Speed Rotation from .040 to 2.0 RPM. Manual Adjustable Table Height from 25" to 49" in 6" Increments. 29" Round Table with Slots. Pendant Control. On/Off Foot Pedal. Serial #104199 Good Condition

1 ea P605016 Teledyne Readco Model UPC-10 Positioner. 1,000 lb Capacity @ 6" C.G.. Power Tilt, Variable Speed Rotation from .040 to 2.0 RPM. Manual Adjustable Table Height from 25" to 49" in 6" Increments. 29" Round Table with Slots. Pendant Control. On/Off Foot Pedal. Serial #104902 Good Condition

1 ea P305001 Ransome SW-10A Twin Axis Positioner. 1,000 lb Capacity @ 6" C.G.. 360 Degree Constant Speed Powered Side Arm Tilt. Variable Speed Rotation from .06 to 2.0 rpm. 36" Diameter Table with Slots. On/off Foot Pedal. 115 Volt. Serial #9321389 Good Condition

1 ea P806002 Aronson Model HD20A-PTVR-2 2,000 lb Positioner. 2,000 lb capacity @ 6" c.g.. 135 degree power tilt. Variable speed rotation from .07 to 2.0 rpm. Manual adjustable table height from 23.75" to 38.75" in 7.5" increments. 24" round table with slots. Pendant control for all functions. 115 volt. Serial #81976 Good Condition

1 ea P806003 Aronson Model HD20A-PTVR-2 2,000 lb Positioner. 2,000 lb capacity @ 6" c.g.. 135 degree power tilt. Variable speed rotation from .07 to 2.0 rpm. Manual adjustable table height from 23.75" to 38.75" in 7.5" increments. 24" round table with slots. Pendant control for all functions. 115 volt. Serial #81985 Good Condition

1 ea P803018 Aronson Model HD-25 2,500 lb Positioner. 2,500 lb capacity @ 6" c.g., Power tilt. Variable speed rotation from .07 to 2.0 rpm. Manual adjustable table height from 34.5" to 56.5" in 5" increments. 30" square table with slots. Pendant control for all functions. Forward / Stop / Reverse Foot Pedal. 230 or 460 volt. Serial # n/a Good Condition

1 ea P503003 Koike-Aronson GE-25A 2,500 lb "Geared Elevation Positioner". 2,500 lb capacity @ 6" C.G.., 135 degree power tilt, Variable speed rotation from .07 to 2.0 RPM. 24" Powered geared elevation from 35" to 59". 36" diameter round table with slots. Pendant control for all functions. 230/460 volt. Serial #9642 Excellent Condition

1 ea P510009 Koike-Aronson HS10BBH/T3-30 "Skyhook" Positioner. 2500 lb Load Capacity. Center of Gravity 28". Overhang 3". Off-Center 38" Table. "Skyhook" Positioners Provide Part Rotation in Two 360 Degree Axis which Result in Partial or Full Inverting of the Workpiece. Pendant Control. Serial #80308 Good Condition

1 ea P510010 Koike-Aronson HS10BBH/T3-30 "Skyhook" Positioner. 2500 lb Load Capacity. Center of Gravity 28". Overhang 3". Off-Center 38" Table. "Skyhook" Positioners Provide Part Rotation in Two 360 Degree Axis which Result in Partial or Full Inverting of the Workpiece. Pendant Control. Serial #N/A Good Condition

1 ea P304009 Cullen- Friestadt Model 25, 2500 lb Positioner. 2500 lb cap. @ 6" C.G.. Variable Speed Rotation by Hand Wheel, Power Tilt,. Manual Adjustable Table Height. 30" Square Table Pendant Control for Stop Start. Serial # 1090 In Working Cond. AS IS ONLY

1 ea P410003 Heinrichs Gluck H75 "Powered Elevation" Positioner. 2,500 lb Capacity @ 12" C.G., Power Tilt, Variable Speed Rotation. 40" to 64" Power Elevation. 24: Square Table. On/Off Foot Pedal. Serial #D20062740 Good Condition

1 ea P709005 P & H Model WP-2 2,500 lb Positioner. 2,500 lb capacity @ 6" c.g.. Manual/hydraulic tilt. Variable speed rotation. Manual adjustable height from 24" to 40" in 6" increments. Pendant control. 230/460 volt. Serial #WP-2447. Good Condition

1 ea P609001 Ransome Model 25P Positioner. 2,500 lb Capacity @ 6" C.G., Power Tilt, Variable Speed Rotation from .031 to 2.0 RPM. 40" Square Table. Manual Height Adjustment from 45-1/2" to 57-1/2. Pendant Control. Serial #N/A Good Condition

1 ea P606003 Ransome Model 25P Positioner. 2,500 lb Capacity @ 6" C.G., Power Tilt, Variable Speed Rotation from .031 to 2.0 RPM. 32" Square Table. Fixed Height of 38" to Center of the Rotational Axis. Pendant Control. Serial #7028. Good Condition

1 ea P406002 Webb 25P, 2,500 lb Positioner. 2,500 lb Capacity @ 6" C.G., Power Tilt, .15 to 1.5 Variable Speed Rotation. 36" Fixed Table Height. 30" Diameter Round Table with Slots. Pendant Control. Serial #N/A Good Condition

1 ea P410004 Ferguson 16/2-F475-270 Pipe Rotator with Clamping Roller System. 3,000 lb Load Capacity. 3" to 20" Diameter Capacity. Variable Speed Pipe Rotation by a Set of 12" Diameter Steel Wheel Turning Rolls with a Hold Down Devise. Turning Rolls are Mounted on a Constant Speed Side Arm Table that has 360 Degree Power Rotation. A Unique System for Welding Off Set Pipe and Pipe Elbows in Any Position. Serial #61418 Good Condition

1 ea P803014 Pandjiris model 30-6AB 3,000 lb Positioner. 3,000 lb capacity @ 6" C.G., 135 degree constant speed power tilt, Variable speed rotation from .07 to 1.40 RPM. Manual adjustable height from 33" to 53" in 4" increments. 30" square table with slots. 25' pendant control. 230 volt. Serial #237-A-52-355 Good Condition

1 ea P708001 Worthington/Ransome Model 30P 3,000 lb Positioner. 3,000 lb capacity @ 6" C.G., Manual adjustable table height from 43" to 61" in 6" increments. Constant speed power tilt. Variable speed rotation from .030 to 1.20 RPM. 40" round table with slots. Pendant control for all functions. 230/460 volt. Serial #56109 Good Condition.

1 ea P805013 Ransome Model 30P 3,000 lb Positioner. 3,000 lb capacity @ 6" c.g., Power tilt. Variable speed rotation from .03 to 1.2 RPM. Fixed table height of 38-3/4" to the center of the rotational axis. 40" square table with slots. Pendant control. 230 or 460 volt. Serial #4840 Good Condition

1 ea P611020 Aronson Model HS30GE/T4-62 Sky Hook Positioner. 4,000 lb Capacity @ 36" C.G. Off of the Turntable Face. 62" Clearance from Center of Turntable. "Skyhook" Positioners Provide Part Rotation in Two 360 Degree Axis which Result in Partial or Full Inverting of the Workpiece. Pendant Control. Serial #7914 Good Condition

P810026 Aronson GE-45 Geared Elevation Positioner. 4,500 lb capacity @ 12” c.g.. 135 degree power tilt. .01 to 1.2 variable speed rotation. Powered elevation from 53” to 86”. 42” square table with slots. Pendant control. Serial # n/a Good Condition

P810018 Aronson X21E Geared Elevation Positioner. 5,000 lb capacity @ 6” c.g.. 135 degree power tilt. Variable speed power rotation. Powered elevation from 53” to 77”. 48” diameter round table with slots. Pendant control. Serial #665 Good Condition

1 ea P806004 Cullen-Friedstat Model 60 6,000 lb Positioner. 6,000 lb capacity @ 12" c.g.. Power tilt. Variable speed rotation. Manual adjustable height from 34.75" to 56.75" in 5.5" increments. 36" diameter table with slots. Pendant control for all functions. 230/460 volt. Serial #204 Good Condition

1 ea RP309001P Koike-Aronson "1994" Model #RDCG/T6-100/26SD "Drop-Center" Positioner. Tilt Capacity of 6600 lbs @ 24" from the table, or 4000 lbs @ 57", or 2000 lbs @ 90"!!. Rotation Capacity of 6600 lbs @ 20" Center of Gravity off of the centerline of rotation. Both Tilt and Rotation Axis have Adjustable Anti-Backlash Dual Pinions on Bull Gears! Both Axis are Servo Drive Variable Speed with Encoders and Resolvers. 360 deg. Rotation @ 0.0-2.0 RPM, 200 deg. Tilt @ 0.0-1.75 RPM. (This Servo Drive Positioner can be converted to a Manual Pendant Operated Machine). Table is 48" x 48" with Hydraulic Master Clamping System for Slave Pallet Mounted Tooling 1 ea slave included. Note; "Drop Center Positioners" are typically used for work pieces with longer Center of Gravity distances from the table, resulting in lower working or welding heights than using higher capacity positioners. This 1994 Machine has NEVER BEEN USED! Brand New Condition!

P810001 Aronson 180T120/CC 180 Degree Tilter. 7,000 lb weight capacity @ 12” c.g. from table. Table tilts 180 degrees from vertical to vertical. For positioning long work pieces such as long truck frames for down hand welding. Table does NOT rotate. Table is a dual screw clamping table with an internal capacity of 40” wide x 27.5” high Very Good Condition

1 ea P805005 Teledyne-Readco Model UHSE-400 7,500 lb Side Arm Positioner. Side arm positioners are also known as Skyhook positioners. 7,500 lb capacity @ 6" c.g.. Dual screw driven powered elevation from 31.5" to 77.5" with the side arm table flat and parallel to the floor. 51" to the center of the rotational axis with the side arm at 90 degrees to the floor. Side arm table is 3.5" off set to the center of the rotational axis on the headstock. Variable speed rotation of the side arm table. 88" maximum part diameter capacity. Pendant control for all functions. 460 volt. Serial #106130 Good Condition

1 ea P805006 Teledyne-Readco Model UHSE-400 7,500 lb Side Arm Positioner. Side arm positioners are also known as Skyhook positioners. 7,500 lb capacity @ 6" c.g.. Dual screw driven powered elevation from 31.5" to 77.5" with the side arm table flat and parallel to the floor. 51" to the center of the rotational axis with the side arm at 90 degrees to the floor. Side arm table is 3.5" off set to the center of the rotational axis on the headstock. Variable speed rotation of the side arm table. 88" maximum part diameter capacity. Pendant control for all functions. 460 volt. Serial #106133 Good Condition

P808011 Aronson GE-90A 9,000 lb Geared Elevation Positioner. 9,000 lb capacity @12” c.g.., 135 degree power tilt. Variable speed rotation from .04 to 1.0 rpm. 33” powered geared elevation from 54.5” to 87.5”with the table flat. 42” diameter round table with a 9” diameter thru hole. Pendant control for all functions. Serial #7019. Good Condition

1 ea RC505001 "2003" Panasonic 3 Axis Model ISP Cartesian Robotic Tig Welding Cell. Initially powered up in November 2003 this cell was used off and on for approximately 8 months before the application was discontinued. This Panasonic Model ISP Cartesian Robot, has approx. 43" (x) horizontal movement, 15" (y) vertical movement and 21" (z) horizontal movement. There is also a 2 axis clamping fixture or tooling table. The complete welding package on this cell includes Two (2) Water Cooled Tig Torches with manual adjustable separation of the torch holders on one axis, Two (2) Panasonic YC-500WX4 Power Supplies completely integrated with all regulators, hoses, cables etc. Water supply required. The welding cell is 75" wide x 103" high x 145" deep and has a complete safety package including, Powered Safety Screen, Light Package, Front Operating Control and Palm Buttons. This cell could be changed to the Mig welding process. This is a late model, low hour, system in Excellent Condition!

1 ea RC505002 "2003" Panasonic 4 Axis Model ISP Cartesian Robotic Tig Welding Cell. Initially powered up in November 2003 this cell was used off and on for approximately 8 months before the application was discontinued. This Panasonic Model ISP Cartesian Robot, has approx. 17 1/2" (x) horizontal movement, 10" (y) vertical movement and 15" (z) horizontal movement. The Fourth Axis is a Rotating Wrist movement for the Torch Holding Device. This Cell also includes a Horizontal Moving Fixture/Tooling Table Integrated with the Robot from the Load/Unload position to the Robotic Welding Position. The Complete Welding Package on this cell includes one (1) Panasonic YC-300WX4 Power Supply and One (1) Water Cooled Tig Torch completely integrated with all cables, hoses, etc. Water supply required. The welding cell is 75" wide x 103" high x 126" deep and has a complete safety package including, Powered Safety Screen, Light Package, Front Operating Control and Palm Buttons. This cell could be changed to the Mig welding process. This is a current model, low hour, system in Excellent Condition!

1 ea RC505004 "2003" Panasonic Robotic VR-008 GII, 6 Axis Tig Welding Cell. The Fixture/Tooling Platform is on an Integrated Horizontal Travel Part Presentation Carriage with 26" of Movement from the Load/Unload Station. This system provides maximum operator access for load/unloading and increased productivity. The Complete Welding Package on this cell includes one (1) Panasonic YC-300WX4 Power Supply, One (1) Water Cooled Tig Torch complete with all cables, hoses, etc. Water supply required. The welding cell is a completely enclosed 102" wide x 103" high x 172" deep structure with side access doors and a complete safety package including, Powered Safety Screen, Light Package, Front Operating Control and Palm Buttons. This is a Current Model, Low Hour System, in Excellent Condition

1 ea R510001P Motoman Model YRFL-NND10G 6-Axis Robot. 22 lb Payload Capacity. Robot Controller NOT Included. "1986" Serial #RH9963-6047-8 "As-Is" Only

1 ea R510011P Miller/OTC Model MRV-6 6-Axis Welding Robot. 13.2 lb Payload Capacity. 55.2" Reach. Includes a Miller Model C-1 Control Cabinet. Welding Equipment NOT Included. "1991". 190-575 Volt. Serial #KB168739 "As-Is" Only

1 ea R510012P Miller/OTC Model MRV-6 6-Axis Welding Robot. 13.2 lb Payload Capacity. 55.2" Reach. Includes a Miller Model C-1 Control Cabinet. Welding Equipment NOT Included. "1992". 190-575 Volt. Serial #KC301838 "As-Is" Only

1 ea RP004001 ABB/Esab Orbit 160B, Robotic Positioner. Two Station Articulating Positioner, for Load & Weld Station. 353 lbs Each Side, Table Rotation 90 Deg. in 2.7 Sec. Or 360 Deg. in 6.8 Sec., Tilting Arm: Turning Speed 0 to 11.8 RPM, Indexing 90 Deg. 2.7 Sec., 360 Deg. 7.2 Sec., Station Interchange 3.5 Sec. This unit was integrated to ABB/Esab a IRB 6L2 Robot. Pos. Ser.#414 441 9034, Cont. 443 440 9005

1 ea RP004002 ABB/Esab Orbit 160B, Robotic Positioner. Same as Above. Pos. 414 437 9367, Cont. 404 436 9060

1 ea RP307001 Aronson Ride-5, Double Ended Tilt and Rotate Robotic Indexing Positioner. This Two-Station Tilt/Rotate Positioner has a Capacity of 500 lbs per Table @ 6" C.G. Tilt and 3" C.G. Rotation. 180 Degree Sweep in 7 Seconds with .0001 Repeatability. Two 18" Diameter Tables with Slots. 8 Non-Adjustable Index Stops for the Table Rotational Axis. 4 Non-Adjust6able Index Stops for the Tilt Axis. Can be Connected to any Robot with Compatible I/O. This is an Indexing Type System, Not Servo. Serial #843 Good Condition

1 ea RP210003P Koike-Aronson RHS10/T2.5-30SD Robotic "Skyhook" Positioner. 2500 lb Load Capacity. Center of Gravity 28". Overhang 3". Off-Center 38" Table. Backlash Control and "Zero" Indicator on Control. "Skyhook" Positioners Provide Part Rotation in Two 360 Degree Axis which Result in Partial or Full Inverting of the Workpiece. Serial #869 Very Good Condition

1ea RP207001 Preston-Eastin Model DEPA-30FBRobotic Positioner. . Two Station Articulating Positioner, for Load & Weld Station. 3,000 lb Capacity @ 6" C.G. Each Side. Fixed Table Height of 48" with the Table Flat. 43" x 43" Square Work Tables. Servo Drive that can be Installed on any Robotic System with the Proper Relays. "1996" Serial #DEPA-30FB-187 Very Good Condition

1 ea RP210001 ABB Model MTA-1600A 3,500Robotic Head/Tailstock. With MHA-1600L-M93 Servo Drive Control Cabinet. Head/Tailstock S/N 642-352-9033. Cabinet S/N 489727-880. Good Condition

1 ea RP210002 ABB Model MTA-1600A 3,500Robotic Head/Tailstock. With MHA-1600L-M93 Servo Drive Control Cabinet. Head/Tailstock S/N 642-352-9031. Cabinet S/N 489727-880. Good Condition

1 ea RP309001P Koike-Aronson "1994" Model #RDCG/T6-100/26SD "Drop-Center" Positioner. Tilt Capacity of 6600 lbs @ 24" from the table, or 4000 lbs @ 57", or 2000 lbs @ 90"!!. Rotation Capacity of 6600 lbs @ 20" Center of Gravity off of the centerline of rotation. Inside Distance Between Upright Sides is 101-3/4" Both Tilt and Rotation Axis have AdjustableAnti-Backlash Dual Pinions on Bull Gears! Both Axis are Servo Drive Variable Speed with Encoders and Resolvers. 360 deg. Rotation @ 0.0-2.0 RPM, 200 deg. Tilt @ 0.0-1.75 RPM. (This Servo Drive Positioner can be converted to a Manual Pendant Operated Machine). Table is 48" x 48" with Hydraulic Master Clamping System for Slave Pallet Mounted Tooling 1 ea. slave included . Note; "Drop Center Positioners" are typically used for work pieces with longer Center of Gravity distances from the table, resulting in lower working or welding heights than using higher capacity positioners. This 1994 Machine has NEVER BEEN USED! Brand New Condition!!

ARO HS2VF “NEW” Koike-Aronson 2,500 lb Head Stock. 2,500 lb load capacity @ 6” C.G., Variable speed rotation from .01 to 1.0 RPM. 27.75” Fixed height to the center of the rotational axis. 30” x 30” Square table with slots. 12’ Remote pendant control. 460 Volt.

ARO TS2 “New” Koike-Aronson 2,500 lb Tailstock. 2,500 lb Load capacity @ 6” C.G., 27.75” Fixed height to the center of the rotational axis. 30” x 30” Square table with slots.

ARO HS4VF “NEW” Koike-Aronson 4,500 lb Welding Head Stocks. 4,500 lb load capacity @ 6” C.G., Variable speed rotation from .01 to 1.0 RPM. 27.75” Fixed height to the center of the rotational axis. 30” x 30” Square table with slots. 12’ Remote pendant control. 460 Volt.

ARO TS4 “New” Koike-Aronson 4,500 lb Tailstock. 4,500 lb Load capacity @ 6” C.G., 27.75” Fixed height to the center of the rotational axis. 30” x 30” Square table with slots.

1 ea H805011 Aronson Model RHS-16 16,000 lb Headstock. 16,000 lb capacity @ 12" c.g., Variable speed rotation from .02 to .60 rpm. Fixed height of 50" to the center of the rotational axis. 35" diameter mounting ring - no table. Pendant control for all functions. 230 or 460 volt. Serial #9115 Good Condition

1 ea H508004 Crossroads 90 Degree Indexing Headstock/Tailstock. 20,000 lb Concentric Load Capacity. To Index Part from Flat to 90 Degrees Only in one Direction and then Back to Starting Position. 59" to the Center of the Rotational Axis. Electric/Hydraulic Driven. 230/460 Volt Input. Good Condition

H809012 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000 lb capacity @ 6” c.g., Variable speed rotation from .02 to 1.7 rpm. Dual pinion drive. 48” Square tables with an 8.5” diameter thru hole. 36” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 9030/9018. Good Condition

H809013 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000 lb capacity @ 6” c.g., Variable speed rotation from .02 to 1.7 rpm. Dual pinion drive. 48” Square tables with an 8.5” diameter thru hole. 36” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 9031/9019. Good Condition

H809014 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000 lb capacity @ 6” c.g., Variable speed rotation from .02 to 1.7 rpm. Dual pinion drive. 48” Square tables with an 8.5” diameter thru hole. 36” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 9034/9025. Good Condition

H809015 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000 lb capacity @ 6” c.g., Variable speed rotation from .02 to 1.7 rpm. Dual pinion drive. 48” Square tables with an 8.5” diameter thru hole. 36” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 9032/9024. Good Condition

H809016 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000 lb capacity @ 6” c.g., Variable speed rotation from .02 to 1.7 rpm. Dual pinion drive. 48” Square tables with an 8.5” diameter thru hole. 36” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 9031/9027. Good Condition

H809017 Aronson HTS-20 20,000 lb Headstock/Tailstock. 20,000 lb capacity @ 6” c.g., Variable speed rotation from .02 to 1.7 rpm. Dual pinion drive. 48” Square tables with an 8.5” diameter thru hole. 36” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 9036/9020. Good Condition

1 set H211007 Teledyne Readco 20,000 lb Headstock/Tailstock. 20,000 lb Capacity @ 6" C.G., Variable Speed Rotation. 53" Diameter Round Table with Slots. Forward/off/Reverse Foot Pedal. Headstock is Mounted on a Screw Driven Variable Speed Travel Car on 9' of Track. Tailstock has a 24" Diameter Through Hole. Pendant Control for all Functions. Serial #106-633 Good Condition

H809018 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000 lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual pinion drive. 54” square tables with an 8” diameter thru hole. 50” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 908. Good Condition

H809019 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000 lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual pinion drive. 54” square tables with an 8” diameter thru hole. 50” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 907.
Good Condition

H809020 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000 lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual pinion drive. 54” square tables with an 8” diameter thru hole. 50” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 906
Good Condition

H809025 Aronson HTS-40 40,000 lb Headstock/Tailstock. 40,000 lb capacity @6: c.g., Variable speed rotation from .026 to .8 rpm. Dual pinion drive. 54” square tables with an 8” diameter thru hole. 50” height to the center of the rotational axis. Pendant control. 230 or 460 volt. Serial # 909/905. Good Condition

H809021 Aronson HTS-90 90,000 lb Headstock/Tailstock. 90,000 lb capacity @6: c.g., Variable speed rotation from .008 to .5 rpm. Dual pinion drive. 54” square tables with an 12” diameter thru hole. 69” height to the center of the rotational axis( currently on a 19” riser that can be removed ). Pendant control. 230 or 460 volt. Serial # 8046/8032. Good Condition

H809022 Aronson HTS-90 90,000 lb Headstock/Tailstock. 90,000 lb capacity @6: c.g., Variable speed rotation from .008 to .5 rpm. Dual pinion drive. 54” square tables with an 12” diameter thru hole. 69” height to the center of the rotational axis( currently on a 19” riser that can be removed ). Pendant control. 230 or 460 volt. Serial # 7830/8033. Good Condition

Universal Balance Welding Positioners

1 ea P804001 Koike-Aronson C2000-P30 Universal Balance Positioner. 1500 lb Capacity @ 12" from the Table. Variable speed powered rotation from 0.1 to 6.0 rpm. Adjustable Height from 30" to 36". 8" Diameter Work Table. Serial #954228 Good Condition

P810005 Aronson C-4000 Universal Balance Positioner. 4,000 lb capacity @ 12” from the table. 360 degree manual rotation. 48” fixed table height. 12: diameter work table. These are manual balanced machines – they are typically used for weldments that require quick re-positioning such as boxes, frames, etc.. Serial #83299 Good Condition

P810006 Aronson C-4000 Universal Balance Positioner. 4,000 lb capacity @ 12” from the table. 360 degree manual rotation. 48” fixed table height. 12: diameter work table. These are manual balanced machines – they are typically used for weldments that require quick re-positioning such as boxes, frames, etc.. Serial #75196 Good Condition

P810007 Aronson C-4000 Universal Balance Positioner. 4,000 lb capacity @ 12” from the table. 360 degree manual rotation. 48” fixed table height. 12: diameter work table. These are manual balanced machines – they are typically used for weldments that require quick re-positioning such as boxes, frames, etc.. Serial #n/a Good Condition

P810008 Aronson C-4000 Universal Balance Positioner. 4,000 lb capacity @ 12” from the table. 360 degree manual rotation. 48” fixed table height. 12: diameter work table. These are manual balanced machines – they are typically used for weldments that require quick re-positioning such as boxes, frames, etc.. Serial #n/a Good Condition

P810009 Aronson C-4000 Universal Balance Positioner. 4,000 lb capacity @ 12” from the table. 360 degree manual rotation. 48” fixed table height. 12: diameter work table. These are manual balanced machines – they are typically used for weldments that require quick re-positioning such as boxes, frames, etc.. Serial #n/a Good Condition

P810010 Aronson C-4000 Universal Balance Positioner. 4,000 lb capacity @ 12” from the table. 360 degree manual rotation. 48” fixed table height. 12: diameter work table. These are manual balanced machines – they are typically used for weldments that require quick re-positioning such as boxes, frames, etc.. Serial #n/a Good Condition

P810011 Aronson C-4000 Universal Balance Positioner. 4,000 lb capacity @ 12” from the table. 360 degree manual rotation. 48” fixed table height. 12: diameter work table. These are manual balanced machines – they are typically used for weldments that require quick re-positioning such as boxes, frames, etc.. Serial #n/a Good Condition

P810012 Aronson C-4000 Universal Balance Positioner. 4,000 lb capacity @ 12” from the table. 360 degree manual rotation. 48” fixed table height. 12: diameter work table. These are manual balanced machines – they are typically used for weldments that require quick re-positioning such as boxes, frames, etc.. Serial #n/a Good Condition

WELDING FLOOR TURNTABLES & TILTING TABLES

SHEET BENDING ROLL & PLANISHERS

1 ea FAB701006 Whitney 4" x 4" x 3/16" Hydraulic Angle Iron Shear. Shear with hydraulic cylinder mounted in a bench mount frame. Hydraulic pump NOT included. Serial # N/A Good Condition

1 ea FAB508001 Niagara 208-A Power Cylinder Flanging/Beading Machine. 10 Gauge Thickness Capacity. 14" Minimum Cylinder Diameter Capacity. 40" Maximum Cylinder Diameter Capacity. 1-1/2" Flange Depth Capacity. Electric Driven by a 3 H.P. Motor. 230 Volt. Serial # N/A In "As-Is" Working Condition

1 ea ME408007 Gullco Plate Beveler Model BCM-12. 5/8" Capacity. Mounted on Roller Base Stand. 230/460 volt. 3-phase. Serial #71382-1 Good Condition

1 ea ME704002 Gulco Model BCM-12 Plate Beveler. Produces beveles at 22.5, 30, 35, 37.5, 45 and 55 degree with proper angle roller assembly. 5/8" width of bevel maximum capacity. Mounted on a roller base stand. 460 volt. Serial #61681-1 Good Condition

1 ea FAB611011P Comaca Model N225 Uninotch Universal Notcher. 8.5" x 8.5" x 1.56" Capacity. Equipped with T-Slotted Cast Table, Pneumatic Gauges, Automatic Feed, Swing Down Blade Guard, Remote Foot Switch, Hydraulic Pump Motor and Electric and Air Controls. Serial #N/A Good Condition

1 ea VC702004 Jetline Model VC-48 Vacuum Chamber. 48" diameter x 24" high welding chamber. 38" high work table. 2 sets of vacuum glove ports. Includes a vacuum pump, vacuum gauge and inert gas flow-meter with pressure regulator. Serial #900657 Excellent Condition

1 ea VC704016 Jetline Model VC-48Z Vacuum Welding Chamber. Chamber is 48" diameter x 24" high with a transparent domed removable top. 39" high work table. Includes 2 pair of 8" diameter glove ports, vacuum pump, vacuum gauge, inert gas flowmeter with pressure gauge. Serial #900441 Excellent Condition

1 ea VC701002 Vacuum Atmospheres Corporation Model HE-233-62 Vacuum Chamber. 96" long x 42" wide x 32" high vacuum / welding chamber. 39" high work table. 5 glove ports on both sides of the 8’ length. Includes a Vacuum Atmospheres Corp. Model HE-373-BIN (Serial #50517-464) 300 degree, 800 watt drying furnace. Serial #20922-1 Good Condition

WELD SEAMERS

1 ea PL612004P Airline Model R40360 Longitudinal Weld Planisher. For Planishing Flat Sheets or Cylinders up to 60" Long. .020 to 3/16" Thickness Capacity on Aluminum or Mild Steel ( 1/8" Maximum Capacity on Stainless Steel ). 10" to 36" Cylinder Diameter Capacity. Serial #R1050 Good Condition

CARRIAGE SIDE BEAM WELDERS

WS412001 Jetline Portable Heavy Duty Cast Long Length “Stellite” Overlay System. Jetline TKK-24 Precision Screw Drive (1-1/2” screw) Side Beam with 24” Travel. Heavy Duty 9-1/2” Power Vertical Slide, 8” of Z axis Manual Slide. Long Rod Feeder with adj. dia. guide. Miller Oscillator with Center Line Steering. Overall dimensions of Portable side Beam Assy. 76” high, 63” wide, 60” long. System includes Miller 300 amp Synchrowave welder and Tig Torch. Excellent Condition!

SB507001 Linde 8’ Side Beam Tig Welding System. 10’ Side Beam with a Linde OM-48 Rack and Pinion Drive Variable Speed Carriage for a Total Travel Length of 8’. Portable Floor Mounting Stantions for a Fixed Height of 59” to the Bottom of the Beam. 4” Manual Cross Slides and a Rotary Slide. Cyclomatic AVC-3 Arc Voltage Control. Miller Weld Oscillator. Jetline CWF-10 Cold Wire Feeder. Good Condition.

SB504001P Jetline Model TKS-96 8’ “Powered Elevation” Side Beam. 124” Side Beam with 8’ of Travel Length. Jetline SWC-3B Variable Speed Travel Carriage. Powered Elevation from 12” to 68” to the Bottom of the Beam. Cyclomatic 4” x 4” Mechanical Seam Tracker. Serial #R4356. Very Good Condition.

SB506001 10 ft. Heavy Duty Custom Side Beam for Sub-Arc or Mig Welding. Welding Length of 10’4”. Variable Speed H.D. Rack and Pinion Carriage. Dual 32” Horizontal Manual Cross Slides with 5” Vertical Manual Slides. Cross Slide System has a 6” Pneumatic Lift. Good Condition.

SB609007 Jetline PST-300 Twin Head Overhead Bridge Side Beam. 8’ of Variable Speed Travel on both Carriages Mounted on the Bridge. 12’ Variable Speed Travel on the Side Beam Carriage. 134” to the Bottom of the Side Beam. Welding Torches are Currently Mounted on Dual Powered Slides that have a Total of 60” Vertical Travel. Welding Equipment Includes 2 each Airco Pulse Arc II 550 CV Power Supplies, 2 each Airco Med-40 Wire Feeders, 2 Each Miller Coolmate 4 Water Circulators, 2 each AWC 1,000 Power Assisted Wire Payoff Reels, 2 each Jetline 6” x 6” Automatic Seam Trackers and a Jetline Jetstar Programmable Control. Good Condition.

SB605008 Precision 15’ Side Beam. 12.5’ of Travel by a Variable Speed Rack & Pinion Driven Carriage that runs on Precision Round Way Track. Fixed Height of 52”. Lincoln electric Vertical and Horizontal Torch Adjusters. Lincoln NA-5 Control and NA-5R Mig Wire Feed Head. Power Supply Not Included. 460 Volt. Serial #N/A.Good Condition.

SB605006 Precision 16’ Side Beam. 13’ 8” of Travel by a Variable Speed Rack & Pinion Driven Carriage that runs on Precision Round Way Track. Manual Adjustable Height from 48.25” to 54.25” in 2” Increments. All Controls Manufactured by Computer Weld Technologies and Include a Motorized VSA-1000 Vertical Slide and HAS-1000 Horizontal Slides each with a MSC-1000 Micro-Step Control, WF-100 Wire Feeder with WFD-1000 Wire Feed Control, WRC-1000 Weld Remote Control, DMC-400 Carriage Control and a WSC-1000 Weld Sequence Control. 460 Volt. Serial #N/A Good Condition.

SB605009 Precision 17’ Side Beam. 14’10” of Travel by a Variable Speed Rack & Pinion Driven Carriage that runs on Precision Round Way Track. Fixed Height of 50. Computer Weld Technologies VSA1000 Motorized Vertical Slide and HSA1000 Motorized Horizontal Slide, each with a MSC-1000 Micro-Step Controller. 460 Volt. Serial #N/A Good Condition.

SB804003 Jetline Model TKMV240 Dual Carriage Side Beam. 240” Length. 2 each Jetline model SWC-6DZ rack and pinion driven variable speed carriages. Mounting stantions and welding equipment NOT included. Serial #969791 Very Good Condition.

SB302001 Pandjiris GB PBT 12 20' Side Beam Welding System. 3 ea. Model 60 Stantions, VSC-21-12 Variable Speed Carriage, Miller Automatic 1 Head Timers and 4-roll Feed Head, Cyclomatic Seam Tracker, 3 Axis Manual Cross Slides. Pulse Arc Control, This is a Factory Integrated System With all Equipment Mounted and Interfaced on Carriage. Good Condition.

SB502001 Jetline TK312 26’ Tig Welding Side Beam. 28’ Side Beam with 26’ of Travel, 50” High Floor Mount Stantions and a Jetline Model 9026 Carriage Control with a Travel IPM Meter. Welding Equipment to Include the Following: a Cyclomatic AVC-3 Arc Voltage Control, a Jetline Model 9029 Cold Wire Feeder with a Micro Wire Feed Head, a Cyclomatic 80A Magnetic Arc Oscillator, 5” Manual Horizontal Slide and a 25” Powered vertical Slide. Serial #920516. Excellent Condition.

WELDING MANIPULATORS

ARO 99 10X10 “NEW” Ransome Model 99 10’ x 10’ Manipulator. 10’ Constant Speed Power Lift at 40 IPM from 28-1/2” to 148-1/2” to the center of the Boom. 10’ Variable Speed Power Reach of 1.5 to 150 IPM from 24” to 144” from the Center of the Mast. 500 lb Weight Capacity Either or Both Ends. 360 Degree Manual Rotation on a Bolt Down Base. Joy Stick Control. NEW - In Stock!!!

ARO 99BS “NEW” Ransome Free Standing Base. For Model 99 10’ x 10’ Manipulator NEW - In Stock!!!

ARO 99 12X10 “NEW” Ransome Model 99 12’ x 10’ Manipulator. 12’ Constant Speed Power Lift at 40 IPM from 28-1/2” to 172-1/2” to the center of the Boom. 10’ Variable Speed Power Reach of 1.5 to 150 IPM from 24” to 144” from the Center of the Mast. 500 lb Weight Capacity Either or Both Ends. 360 Degree Manual Rotation on a Bolt Down Base. Joy Stick Control. NEW - In Stock!!

ARO 99 12X12 “NEW” Ransome Model 99 12’ x 12’ Manipulator. 12’ Constant Speed Power Lift at 40 IPM from 28-1/2” to 172-1/2” to the center of the Boom. 12’ Variable Speed Power Reach of 1.5 to 150 IPM from 24” to 168” from the Center of the Mast. 500 lb Weight Capacity Either or Both Ends. 360 Degree Manual Rotation on a Bolt Down Base. Joy Stick Control. NEW - In Stock!!!

ARO 99BL “NEW” Ransome Optional Free Standing Base. For Model 99 12’ x 10’ or 12’ x 12’ Manipulator NEW - In Stock!!!

ARO 1212 14X12 “NEW” Ransome Model 1212 14’ x 12’ Manipulator. 14’ Constant Speed Power Lift at 36 IPM from 28-1/2” to 148-1/2” to the center of the Boom. 12’ Variable Speed Power Reach of 1.8 to 180 IPM from 30-1/2” to 174-1/2” from the Center of the Mast. 750 lb Weight Capacity Either or Both Ends. 360 Degree Manual Rotation on a Bolt Down Base. Joy Stick Control. NEW - In Stock!!!

ARO 1212 14X14 “NEW” Ransome Model 1212 14’ x 14’ Manipulator. 14’ Constant Speed Power Lift at 36 IPM from 28-1/2” to 148-1/2” to the center of the Boom. 14’ Variable Speed Power Reach of 1.8 to 180 IPM from 30-1/2” to 198-1/2” from the Center of the Mast. 750 lb Weight Capacity Either or Both Ends. 360 Degree Manual Rotation on a Bolt Down Base. Joy Stick Control. New - In Stock !!!

ARO 1212BL “NEW” Ransome Optional Free Standing Base. For Model 1212 14’ x 12’ or 14’ x 14’ Manipulator. NEW - In Stock !!!

WPI TCM “NEW” Universal Manipulator Variable Speed Travel Car. Variable Speed Travel from 3” to 135” IPM that runs on 56-1/2” A.S.C.E. 60# Machined Rail Track. Pendant Control. 230/460 Volt. “NEW”

WPI TCT “New” Universal Track for Manipulator Travel Car. 10’ x 56-1/2” A.S.C.E. 60# Machined Rail Track. “NEW”

8 ea M610004 Positech Model "G" Simple Air Manipulator. Positech Model G SAM Parts Manipulator uses Pneumatic Power to Provide Quick Response and Superior Maneuverability with Loads up to 370 lbs. Vertical Lift from 44.7" to 87.3". Reach from 66" to 126". 360 Degree Full Rotation. Includes Portable Base with Fork Truck Lifting Slots. Good Condition

1 ea M806001 Roller & Assoc. Head Director Manipulator on Manual Travel Car. Adjustable height from 49" to 112" by a manual hand pump hydraulic cylinder. Reach 71" when at 49", 43" reach when at 112" and 74" reach with the arm level. 360 degree manual mast rotation. 4" manual cross slides mounted on the end of the boom arm. All mounted on a manual travel car. Serial #n/a Good Condition

1 ea M409001 Porta Tools / Lincoln Model H-600 26" x 48" Manipulator. Constant Speed Power Reach from 24" to 50", Screw Driven Constant Power Elevation from 12" to 60". Lincoln DC-600 Power Supply and a NA-5 Submerged Arc Control and Head, Lincoln Manual Horizontal and Vertical Adjusters. All Mounted on a Variable Speed Travel Car with 40’ of Track. Serial #W7702-0270 Good Condition

1 ea M606017 Ransome Model 44 4’ x 4’ Manipulator / Travel Car. 4’ Constant Speed Powered Lift from 25" to 73". Manual Reach from 9" to 57" from the Center of Mast Rotation. Manual King Pin Base. Manual Travel Car. 115 Volt. Serial #0526806 Good Condition

M810004 Aronson S6VRA6CL-MK 6’ x 6’ Scarab I Manipulator. 1,700 lb load capacity either or both ends. 6’ constant speed power lift from 40.5” to 112.5”. 3.3 to 100 IPM variable speed reach from 18” to 90”. 360 degree manual mast rotation. Floor mount base. 460 volt. Serial #7448
Good Condition.

M810002 Aronson G8CR6ML-PK 6’ x 8’ Locust I Manipulator. 300 lb load capacity either or both ends. 6’ Constant speed power lift from 29” to 101”. 8’ manual reach from 14” to 120”. 360 degree manual mast rotation. Mounted on a portable king pin base. 110 volt. Serial #72104
Good Condition

M810003 Aronson G6CR6ML-PK 6’ x 8’ Locust I Manipulator. 300 lb load capacity either or both ends. 6’ Constant speed power lift from 29” to 101”. 3.3 TO 100 IPM variable speed reach from 14” to 86”. 360 degree manual mast rotation. Mounted on a portable king pin base. 110 volt. Serial #75236
Good Condition

1 ea M309004 Mark "V" 8' x 5' Manipulator and Travel Car. 8' Constant Speed Power Elevation from 32" to 128". 5' Variable Speed Power Reach from 15" to 75". Manual Mast Rotation. With 6" Linde Powered Horizontal and Vertical Cross Slides and a Manual Rotary Slide. All Mounted on a Manual Travel Car that Runs on Inverted Angle Iron Track (Track Not Included). Currently Equipped with a L-Tec 650 CC/CV Power Supply, GMA Feed Head and all Cables. Remote Control Console for all functions Including Welding Process. Serial #6620-34-31 Good Condition

1 ea M712001 Pandjiris Double 8 10’ x 8’ Manipulator. 10’ constant speed power elevation from 22" to 139". 3" to 110" variable speed reach from 21" to 117" (8’). 360 degree manual mast rotation. 300 lb weight capacity either end, 500 lb combined weight capacity. Bolt down floor mount base. 460 volt. Serial #81-2159-1 Good Condition

1 ea. M404001 Precision 9’ x 9’ x 27-1/2’ Heavy Duty Manipulator/Travel Car System. This system was manufactured for the Robotics Industry for precision welding on military vehicles. Heavy Duty Mast has 9 ft. of constant speed of precision screw driven lift starting at approx. 36" from the floor to 144" high under the boom. The mast has manual rotation with lock. Boom has 9 ft. of "Dual Pinion" variable speed gear drive and rolls on Thompson Roundway roller system. Weight capacity approx. 750 lb. Travel car is 5’ x 5’ x 19" High and Variable Speed Rack & Pinion Drive on 33 ft. of Thompson Roundway Precision Track. All three (3)-axis paths are accordion booted. This system is now Servo driven. We will change to Pendant AC-Inverter or D.C. Drives. Very Good Condition

1 ea M709002P Ransome Model 66 10’ x 10’ Manipulator. 10’ Constant speed powered cable lift from 18" to 138" to the floor. 10’ Variable speed powered reach from 15" to 135" from the center of the mast rotation. 360 Degree manual rotation. Shop built fall safe device. NOT for sub-arc applications! 115 volt. Serial #649830 Currently in Working Condition - As-Is Only

M803009 Aronson Model S10VRA14CL Scarab I Manipulator. 1,300 lb load capacity either or both ends. 14’ constant speed power lift from 38.75” to 206.75”. 3.3 to 100 IPM variable speed reach from 43” to 163”. King pin base for 360 degree manual mast rotation. 460 volt. Serial #81280
Good Condition

M807004 Ransome Model 1212 12’ x 12’ Travel Car Manipulator. 750 lb weight capacity either or both ends. 38 ipm constant speed power lift from 62.25” to 206.25”. 3.35 to 134 ipm variable speed reach from 39.5” to 183.5”. 360 degree manual mast rotation. Mounted on a 33 gauge rack and pinion travel car with a speed range from 5 to 200 ipm. Travel car includes 30’ of track. Pendant control for all functions. Welding equipment NOT included. 460 volt. Serial #692597 Good Condition

1 ea M710002 Ransome Model XXHD 13.5’ x 18’ Travel Car Manipulator. 13.5’ powered elevation from 57" to 219" to the bottom of the boom. 2.7 to 108 IPM variable speed reach from 55" to 271" from the center of the mast rotation. 360 degree power mast rotation. 2,000 lb load capacity either or both ends. Mounted on a variable speed travel car that runs on 84" gauge rail track. Track NOT Included. 460 volt. Serial #639089 Reconditioned Price or As-Is Price

M803009 Aronson Model S10VRA14CL 14’ x 10’ Manipulator. 1,300 lb load capacity either or both ends. 14’ constant speed powered lift from 36.5 " to 204.5". 10’ of 3.3 to 100 IPM variable speed reach from 43" to 163". 360 degree manual mast rotation. Bolt down base. 460 volt. Serial #81280 Good Condition

TURNING ROLLS - TANKS VESSELS PIPE

Any Be-co Model F-400 Standard Universal Power Unit. Intended for both automatic and hand work, the F-400 is equipped with a ½-horsepower AC/DC motor, a 400:1 gear ratio, and dual-speed drive allowing either 3 to 20 or 5 to 30 inch-per-minute rotational speed. Our Standard BE-CO units will accommodate pipe sizes from 2" to 10’ diameters with quick-connecting expansion chains

Any Be-co NEW Model F-600 Heavy Duty Universal Power Unit. A heavy duty power unit with greater turning force for larger tank rotation This unit is identical to the Model F-400 standard power unit, but with a 600:1 gear ratio providing a choice of 2 to 13 1/3 or 3 1/3 to 20 ipm rotational speed."New"

Any PRO TR1500 "New" Profax 1,500 lb Turning Rolls. 1,500 lb Turning Capacity (750 lb Max Set Down Weight for each the Drive and Idler). 1-1/2" to 16" Diameter Capacity. Variable Speed from 0.0 to 140 IPM. 10" Diameter x 2" Wide Rubber Wheels. High Frequency Protected. 115 Volt.Brand New –

Any WPI TRD2000/WRI2000 "NEW" Weld Plus #2000 Turning Rolls. Drive Roll & Idler each have a capacity of 2000 lbs. For diameters from ½" to 40". 10" dia. wheels, High Frequency Protection, Variable Speed Control. With Foot Switch. 115 volt "NEW"

Any GEN TR0100 "NEW" Gentec Model TR-0100 2,200 lb Turning Roll Set. 2,200 lb total weight capacity. 1" to 31" diameter capacity. Variable speed from 3.5 to 63 IPM. 2" wide x 8" diameter polyurethane wheels. High frequency protected. 115 volt. NEW in Stock!! Ready to Ship

Any PAN PIPER 3 "NEW" Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, Add an Additional Idler for a Total Capacity of 6,000 lb. 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Drive and 1 ea. Idler. Pendant Control. "NEW" !

PRE RPJS 50 Preston-Eastin Model RPJS-50 5,000 lb Pipe Support Stand. 5,000 lb weight capacity. 2” to 40” diameter capacity. Manual adjustable height from 27.5” to 37.5” to the top of the rolls. Brand New – Ready to Ship!

Any WPI T6/I6 "NEW" Weld Plus #6000 Turning Rolls. 6000 lb Capacity Set Includes: 1 Drive Roll & 1 Idler Roll. Each Axle Has Double 10" X 2" Rubber Rolls. Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From 3" to 72" via 3 Ctr. 115 volt. Ship Wt. 490 lbs/set. "NEW"

Any WPI T9D 8 "NEW" Weld Plus #6000 Turning Rolls. 6000 lb Capacity (Add an additional idler for a total capacity of 9,000 lb.). Set Includes: 1 Drive Roll & 1 Idler Roll. Dual Driven Power Unit. Each Axle Has Double 10" X 2" Rubber Rolls. Speed Range 0 to 40 IPM, Pendant Speed Control, For Diameters From 3" to 96" via 4 Ctr. 115 volt. Ship Wt. 580 lbs/set. "NEW

1 set WEB T-18/I-18 "NEW" 12,000 lb Turning Rolls. Set Includes 1 T-18 Driver and 1 I-18 Idler (add extra Idler for 18,000 lb Capacity). 12" Diameter Rubber Wheels, 2 Wheels per Axle for 7" Total Wheel Face. For Diameters from 12" to 12’. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship

1 ea PAN TANKER 150/75 "NEW" Pandjiris 15,000 lb Tanker Turning Roll Set. 15,000 lb weight capacity. 3.5" to 12’ diameter capacity. Variable speed from 2.9 to 72 IPM. 25’ pendant control. 115 volt. No wheel adjustments to be made for the full range of diameters and Tankers maintain a constant center line !! NEW in Stock!! Ready to Ship

1 set WEB T-24/I-24 "NEW" 16,000 lb Turning Rolls. Set Includes 1 T-24 Driver and 1 I-24 Idler (add extra Idler for 24,000 lb Capacity). 12" Diameter Rubber Wheels, 3 Wheels per Axle for 10.5" Total Wheel Face. For Diameters from 12" to 16’. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship

1 set WEB T-30/I-30 "NEW" Webb 20,000 lb Turning Rolls. Set Includes 1 T-30 Driver and 1 I-30 Idler (add extra Idler for 30,000 lb Capacity). 12" Diameter Rubber Wheels, 4 Wheels per Axle for 14" Total Wheel Face. For Diameters from 12" to 16'. Variable Speed from 0 to 45 IPM. With Remote Pendant Control. 115 Volt. Brand New – Ready to Ship

IRC 15 5D/5I "NEW" Irco Automation 20,000 lb. Turning Rolls. Set Includes 1 15-5 Driver and 1 15-5 Idler (add extra Idler for 30,000 lb Capacity). 12” Diameter x 3" Wide Rubber Wheels, 2 Wheels per Axle for a 6” Total Wheel Face. For Diameters from 12” to 12’. Variable Speed from 2 to 55 IPM. With Remote Pendant Control. 460 Volt. Shipping Weight 1,550 lbs./set. Ready to Ship! New

1 set WEB R-500/I-500 "NEW" Webb 40,000 lb Turning Rolls. Set Includes 1 R-500 Drive and 1 I-500 Idler (add extra Idler for 60,000 lb Capacity). 18" Diameter Rubber Wheels, 1 Wheel per Axle with a Wheel Face of 7". For Diameters from 10" to 15’. Variable Speed from 7 to 58 IPM. With Remote Pendant Control. 230/460 Volt. Brand New – Ready to Ship

IRC 30 10D/10I "NEW" Irco Automation 40,000 lb. Turning Rolls. Set Includes 1 30-10 Driver and 1 30-10 Idler (add extra Idler for 60,000 lb Capacity). 12” Diameter x 4" Wide Rubber Wheels, 2 Wheels per Axle for a 8” Total Wheel Face. For Diameters from 12” to 12’. Variable Speed from 2 to 55 IPM. With Remote Pendant Control. 460 Volt. Shipping Weight 1,850 lbs./set. Ready to Ship! New

1 set ARO WRD-20/WRI-20 "NEW" Koike-Aronson 20 Ton Turning Rolls. Capacity: 1 Drive, 1 Idler 20 Tons. Add 1ea additional Idler (not included) Cap. 30 Tons. Three (3) 12" dia. X 4" Rubber Wheels per axle with Overload Disc. Variable Speed of 2 to 50 IPM surface speed.. For work diameters from 6" to 13 ft. Remote Pendant Control. Input Power 460 volt 1 phase. NEW!

1 set WEB M-500/I-500 "NEW" Webb 40,000 lb Turning Rolls. Set Includes 1 M-500 Drive and 1 I-500 Idler (add extra Idler for 60,000 lb Capacity). 22" Diameter Rubber Wheels, 1 Wheel per Axle with a Wheel Face of 7". For Diameters from 24" to 14’. Variable Speed from 7 to 61 IPM. With Remote Pendant Control. 230/460 Volt. Brand New – Ready to Ship

1 set PAN MM30/15 "NEW" Pandjiris Missouri Mule 30/15 Turning Rolls. Drive and Idler. 60,000 lb Weight Capacity. 12" to 16’ Diameter Capacity. Variable Speed from 5.3 to 53 IPM. 20" Diameter x 10" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW"Additional Idlers Available

IRC 45 15D/15I "NEW" Irco Automation 60,000 lb. Turning Rolls. Set Includes 1 45-15 Driver and 1 45-15 Idler (add extra Idler for 90,000 lb Capacity). 20” Diameter x 4.5" Wide Rubber Wheels. For Diameters from 12” to 20’. Variable Speed from 1.5 to 45 IPM. With Remote Pendant Control. 460 Volt. Shipping Weight 3,550 lbs./set. Ready to Ship! - New

1 set WEB R-1000/I-1000 "NEW" 66,000 lb Turning Rolls. Set Includes: 1 ea R-1000 Driver, 1 ea R-1000 Idler (add extra idler for 100,000 lb capacity). Rubber Wheel diameter 18" with 2 Wheels per axle for a Total Wheel face of 14". For Diameters from 10" to 20'. Variable Speed fro 7 to 58 IPM. With Remote Pendant Control. 1 year warranty. We stock 460 volt, 230 on request. Brand New

1 set T102214 "NEW" Webb R-1500, 100,000 lb Turning Rolls. Set Includes: 1 ea R-1500 Driver, 1 ea R- 1500 Idler (add extra idler for 150,000 lb capacity). Rubber Wheel diameter 18" with 3 Wheels per axle for a Total Wheel face of 21". For Diameters from 10" to 22'. Variable Speed from 7 to 56 IPM. With Remote Pendant Control. 1 year warranty. We stock 460 volt, 230 on request. Brand New

ARO CPRR / CIRR “NEW” Ransome 60 Ton “C” Series Turning Roll Set. Set includes 1 each CPRR drive unit and 1 each CIRR idler unit for a capacity of 60,000 lb (add an additional idler for a total capacity of 90 ton.). Variable Speed drive from 1.45 to 58 ipm. 20.5” diameter x 14” wide rubber wheels. For diameters from 7” minimum to 20’ maximum. 20’ Pendant control for all functions. 460 volt. Shipping weight 5,600 lbs/set. NEW – Ready to Ship

1 set RAN Koike Ransome "NEW" 100 Ton "MICARTA" Turbine Rotor Turning Rolls. Model 100 PRM Power Roll, Model 50IRM Idler Roll. Micarta Rolls are 22" diameter X 8" wide Micarta Surface. Roller Center Line Distance 23", For Shaft diameters from 8" to 32", 3 HP AC Inverter Drive, Variable Surface Speed of Roller from 1.5 to 60 IPM. Pendant Control w/40’ of Control Cable with Forward, Stop, Reverse, 10 Turn Pot. Speed Control and Rapid Traverse. Input Power Required 460 volts, 60 Hz. 3 phase.

1 set PRE Preston-Eastin "NEW" TDRA/TIRA-120, 240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120, 120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total Capacity of 240,000 lbs or 120 tons. This set will Turn and Support 360,000 lbs or 180 tons by adding optional extra TIRA-120 Idler. Three (3) Tires 20" dia. x 8" wide and Four (4) Overload Disc per Axle. For work rotating diameters from 8" to 16 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote Pendant Control 460 volt input.

1 set PRE Preston-Eastin "NEW" TDRA/TIRA-120-22D, 240,000 lbs, 120 Ton, Turning Rolls. Set includes 1 ea TDRA-120, 120,000 lb Driver, and 1 ea TIRA 120,000 lb Idler. for a Total Capacity of 240,000 lbs or 120 tons. This set will Turn and Support 360,000 lbs or 180 tons by adding optional extra TIRA-120 Idler. Three (3) Tires 20" dia. x 8" wide and Four (4) Overload Disc per Axle. For work rotating diameters from 8" to 22 ft., Variable Speed Rotation by Inverter Drive with 20 ft Remote Pendant Control. 460 volt input. "New" in our Stock!

1 set PAN PR180/60 "NEW" Pandjiris Model PR-180/60 Turning Rolls. Drive and Idler. 120,000 lb Weight Capacity (Add a Second Idler Roll for a Total Capacity of 180,000 lb). 12" to 21’ Diameter Capacity. Variable Speed from 3.0 to 75 IPM. 20" Diameter x 15" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW" Additional Idlers Available

1 set PAN PR270/90 "NEW" Pandjiris Model PR-270/90 Turning Rolls. Drive and Idler. 180,000 lb Weight Capacity (Add a Second Idler Roll for a Total Capacity of 270,000 lb). 12" to 21’ Diameter Capacity. Variable Speed from 5.6 to 55.7 IPM. 20" Diameter x 20" Wide Rubber Wheels. Pendant Control. 460 Volt "NEW" Additional Idlers Available

TANK ROLLS & PIPE TURNING ROLLERS

1 ea T309002 Kistler / Pandjiris Model U-150 / U-150H Pipe Rotator with Clamping Roller System. 1" - 8" Clamping Range. 660 lb Horizontal Weight Capacity. 330 lb Vertical Weight Capacity. Variable Speed Rotation from 0 to 50 IPM. With Optional #151 Cart and Forward / Stop / Reverse/Variable Speed Rotary Foot Drum Control. An Excellent System for Flange and Elbow Welding on Small Diameter Pipe. 115 Volt. Good Condition

1 ea T603002 Ransome PTR Pipe Support Stand. 1,000 lb Weight Capacity. 2" to 36" Diameter Capacity. 8" Diameter x 2" Wide Steel Wheels. 8" Height Adjustment from 24" to 32". Serial #2918044 Good Condition

T811002 Aronson PTR1000 Pipe Support Stand. 1,000 lb weight capacity. 2” to 36” diameter capacity. 25.625” to 33.625” manual screw adjustable height. 8” diameter x 2” wide rubber wheels. Serial # n/a Good Condition

1 ea T612012 Pandjiris Model OS-15 Pipe Support Stand. 1,500 lb Capacity. 2" to 24" Diameter Capacity. Manual Adjustable Height. Serial #800-9138-1 Good Condition

1 ea T701005 Pandjiris Piper 3 Turning Rolls. 4,000 lb load capacity, 3-1/2" to 40" diameter capacity. Variable speed from 2.0 to 60 IPM. Drive and idler. 2-1/2" wide X 12" diameter steel wheels on both the drive and idler. Pendant Control. Serial #N/A Good Condition

1 ea T610008 Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Steel Wheels on the Powered Unit, Rubber on the Idler Unit. Pendant Control. Serial #N/A Good Condition

1 ea T505006 Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good Condition Additional Idlers Available

1 ea T505007 Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good Condition

1 ea T505008 Pandjiris Piper 3 Turning Rolls. 4,000 lb Load Capacity, 3-1/2" to 40" Diameter Capacity. Variable Speed from 2.0 to 60 IPM. Drive and Idler. 2-1/2" Wide X 12" Diameter Rubber Wheels. Pendant Control. Serial #N/A Good Condition

T808003 Pandjiris Piper 3 2,000 lb Idler. 3.5” to 40” diameter capacity. 2,000 lb weight capacity. 12” diameter x 2.5” wide rubber wheels. Good Condition

T808004 Pandjiris Piper 3 2,000 lb Idler. 3.5” to 40” diameter capacity. 2,000 lb weight capacity. 12” diameter x 2.5” wide rubber wheels. Good Condition

T808005 Pandjiris Piper 3 2,000 lb Idler. 3.5” to 40” diameter capacity. 2,000 lb weight capacity. 12” diameter x 2.5” wide rubber wheels. Good Condition

T808006 Pandjiris Piper 3 2,000 lb Idler. 3.5” to 40” diameter capacity. 2,000 lb weight capacity. 12” diameter x 2.5” wide rubber wheels. Good Condition

T808007 Custom 2,000lb Idler Roll. 1.5” to 48” diameter capacity. 2,000 lb weight capacity. 10.5” diameter x 2.75” wide rubber wheels. Wheels manually adjust from 1.75 to 21” center to center by a threaded bolt

T808008 Custom 2,000lb Idler Roll. 1.5” to 48” diameter capacity. 2,000 lb weight capacity. 10.5” diameter x 2.75” wide rubber wheels. Wheels manually adjust from 1.75 to 21” center to center by a threaded bolt

T808009 Custom 2,000 lb Idler Roll. 1.5: to 60” diameter capacity. 2,000 lb weight capacity. 10.5” diameter x 2.75” wide rubber wheels. Wheel settings of 11” and 26” center to center. Good Condition

T8080010 Custom 2,000 lb Idler Roll. 1.5: to 60” diameter capacity. 2,000 lb weight capacity. 10.5” diameter x 2.75” wide rubber wheels. Wheel settings of 11” and 26” center to center. Good Condition

1 set T605003 Worthington "Ranger 3" Pipe Turning Rolls. 4,000 lb Capacity. 3.5" to 40" Diameter Capacity. Travel Speed from .9 to 37.7 IPM. 3" Wide x 12" Diameter Rubber Wheels. Drive & Idler. Pendant Control. 120 Volt. Serial #N/A Good Condition

1 ea T405001 Radian 3,000 lb Turning Rolls. Drive Roll with Idler. 3,000 lb Total Weight Capacity. 16" Diameter x 4" Wide Rubber Tires. Overload Discs. Constant Speed Friction Drive Rotation. 4" Minimum to 36" Maximum Diameter Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up or Paint Good Condition

1 ea T405002 Radian 3,000 lb Turning Rolls. Same As Above. Electrical Re-Conditioned - No Clean Up or Paint Good Condition or Converted to Variable Speed with Pendant

1 ea T976004 Worthington Type A, 4000 lbs Driver Only. 15" dia. X 3" Wide Rubber Faced Rolls, Variable Speed, 12,000 lbs Turning Capacity. Good Condition

1 set T708014 Weldwire Model WWRD-2 4,000 lb Turning Rolls. 4,000 lb capacity for 1 drive and 1 idler. 3.5" to 40" diameter capacity. 12" diameter x 3" wide rubber wheels. Pendant control. 120 volt. Serial #9439/9471 Good Condition

1 ea T711010 Aronson WRI-5 5,000 lb Idler Roll. 5,000 lb weight capacity. 6" to 12’ diameter capacity. Idler Only !! Serial #n/a Good Condition

1 ea T711011 Aronson WRI-5 5,000 lb Idler Roll. 5,000 lb weight capacity. 6" to 12’ diameter capacity. Idler Only !! Serial #n/a Good Condition

T810023 Aronson WRI-5 5,000 lb Idler. 6” to 6’ diameter capacity. 12” diameter x 4.75” wide rubber wheels with overload discs. Serial #9304
Good Condition

T810028 Cayuga 5,000 lb Power Elevation Unit Frame Roll. 5,000 lb weight capacity. 24” minimum length capacity. 30” to 72” diameter capacity. Variable speed travel. Powered elevation from 36” to 48” to the top of the wheels. 12” diameter x 3” wide rubber wheels. 230 or 460 volt. Serial #28A86
Good Condition

1 ea T405003 Radian 5,000 lb Turning Rolls. Drive Roll with Idler. 5,000 lb Total Weight Capacity. 16" Diameter x 1" Wide Steel Wheels. Overload Discs. Constant Speed Chain Drive Rotation. 4" Minimum to 36" Maximum Diameter Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up or Paint Good Condition or Converted to Variable Speed with Pendant

1 ea T405004 Radian 5,000 lb Turning Rolls. Same as Above. Electrical Re-Conditioned - No Clean Up or Paint Good Condition or Converted to Variable Speed with Pendant

1 ea T409003 Ransome/Worthington AIRR Idler Roll. 5,000 lb Weight Capacity. 5" to 12’ Diameter Capacity. 2-1/2" Wide x 16" Diameter Rubber Wheels Good Condition

1 ea T409004 Ransome/Worthington AIRR Idler Roll. 5,000 lb Weight Capacity. 5" to 12’ Diameter Capacity. 2-1/2" Wide x 16" Diameter Rubber Wheels Good Condition.

1 set T10805 Teledyne-Readco TRR-50, 5000 lb Steel Wheel Turning Rolls. Variable Speed ½ HP, 115 volt, Pendant Control of 2.5 to 75 IPM. 9" diameter x 4" wide Steel Wheels. For diameters from 3" to 66". Now set in unitized frame. 1980 Ser. #S-84563. Good Condition

2 ea T204001 Aronson T1I 6,000 Idler Roll. 6,000 lb Capacity. 24" Diameter x 3" wide Rubber Wheels. 4' Minimum Capacity, 10' Maximum Diameter Capacity. Idler Only. Serial #6049 Good Condition

1 ea T711009 Web Model T-18 Powered Turning Roll Only. 18,000 lb turning capacity, 6,000 lb support capacity. 12" to 12’ diameter capacity. 12" diameter x 7" wide rubber wheels. Variable speed reeves drive. On/off pendant control. 230/460 volt. Powered roll only. Serial #n/a Good Condition0.

1 ea T405007 Radian 10,000 lb Turning Rolls. Drive Roll and Idler. 10,000 lb Total Weight Capacity. 16" Diameter x 3.5" Wide Rubber Wheels. Constant Speed Rotation. 4" Minimum to 144" Maximum Capacity. 230/460 Volt. Electrical Re-Conditioned - No Clean Up or Paint Good Condition Converted to Variable Speed with Pendant

1 ea T209003 Aronson Model WPS4WD101-18 4-Wheel Drive Unit Frame Pipe Turning Roll. "1995" 10,000 lb Capacity. 18" Frame Length. 24" to 54" Diameter Capacity. 15" Diameter x 2.5" Wide Steel Wheels. Variable Speed from 2.0 to 50 IPM. Pendant Control. Used for Overlaying of Short Steel Mill Rolls. Serial #9580 Good Condition

T810025 Aronson WRD-10C Drive Roll. 10,000 lb weight capacity, 30,000 lb turning capacity. 12” to 6’ diameter capacity. Variable speed from 2 to 50 ipm. 20” diameter x 5” wide rubber wheels with overload discs. Serial #72033 Good Condition

1 ea T707002 Ransome Model APRR 5 Ton Turning Rolls. 10,000 lb weight capacity. 5" to 48" diameter capacity. Variable speed travel from 6.4 to 61 IPM. 16" diameter x 2.5" wide rubber wheels. Pendant control. Serial #3330805 Good Condition

1 ea T508003 Worthington "A" 10,000 lb Turning Rolls. 10,000 lb Weight Capacity.5" to 72" Diameter Capacity. Variable Speed Rotation from 6.1 to 61 IPM by a Sheave Drive. 16" Diameter x 3" Wide Rubber Wheels. On/Off Pendant. 230/460Volt. Drive and Idler. Serial #N/A "As-Is" Only

1 ea T508004 Worthington "A" 10,000 lb Turning Rolls. 10,000 lb Weight Capacity.5" to 12’ Diameter Capacity. Variable Speed Rotation from 6.1 to 61 IPM by a Sheave Drive. 16" Diameter x 3" Wide Rubber Wheels. On/Off Pendant. 230/460Volt. Drive and Idler. Serial #N/A "As-Is" Only

T810024 Ransome BIRR 15,000 lb Idler. 7” to 8’ diameter capacity. 20.5” diameter x 7” wide rubber wheels. Serial #364298 Good Condition

1 ea T704013 Aronson Model WRD-20 20,000 lb Drive Roll Only. 20,000 lb weight capacity. 60,000 lb turning capacity. 6" to 13’ Diameter capacity. 12" diameter x 13-3/8" rubber wheels. Variable speed from 2.0 to 50 IPM. Serial #83440 Good Condition

1 ea T209006 Aronson WRD-10/WRI-10 10 Ton Turning Rolls. 20,000 lb weight capacity. 6" to 13’ diameter capacity. Variable speed travel from 2 to 50 IPM. 12" diameter x 4" wide rubber wheels with over load discs. Drive & Idler. Serial #63132 Good Condition

1 ea T510016 Irco 10T-PR 10 Ton Turning Rolls. 20,000 lb Capacity, 12" to 60" Diameter Capacity. 19" Diameter x 4" Wide Rubber Wheels. Variable Speed Drive. Pendant Control. 230/460 Volt. Serial #5203 Good Condition

1 ea T508001 Worthington "AA" 20,000 lb Turning Rolls. 20,000 lb Weight Capacity.12" to 20’ Diameter Capacity. Variable Speed Rotation from 1.48 to 58 IPM by a Sheave Drive. 24" Diameter x 4" Wide Rubber Wheels. On/Off Pendant. 230/460Volt. Drive and Idler. Serial #N/A "As-Is" Only

1 set TSP10802P Pandjiris MM-15T-SPL Rotation System for Ultrasonic Testing. This is a U.T. Rotation System for Digitally Indicated, Variable Speed, Turning of Cylindrical Parts under fluids flow. The System uses the Missouri Mule 15 Ton Turning Roll Configuration, Specially Manufactured for this type of Testing. The Drive Wheels are 16" dia. Grooved, Hardened Steel which are can be pivoted up and down for various workpiece diameters. The Idler Wheels are 6" Grooved, Hardened Steel , and have 13" of Motorized Powered Adjustable Height. There are "Vertical Thrust Rolls" on both driver and idler to prevent unwanted "walking". The Driver and Idler separation is adjustable for lengths from 24" to 100" by a long hand wheel screw. The whole system is in a fluid collection pan. Ser. #673-862 Very Good Condition

1 set TSP10801P Pandjiris MM-30T-SPL Rotation System for Ultrasonic Testing. This is a "1994" U.T. Rotation System for Digitally Indicated, Variable Speed, Turning of Cylindrical Parts under fluids flow. The System uses the Missouri Mule 30 Ton Turning Roll Configuration, Specially Manufactured for this type of Testing. The Drive Wheels are 20" dia. Grooved, Hardened Steel which are can be pivoted up and down for various workpiece diameters. The Idler Wheels are 6" Grooved, Hardened Steel , and have 14" of Motorized Powered Adjustable Height. There are "Vertical Thrust Rolls" on both driver and idler to prevent unwanted "walking". The Driver and Idler separation is adjustable for lengths from 30" to 120" by a long hand wheel screw. The whole system is in a fluid collection pan fitted with removable platform slat sections. Ser. #SO. 60-4604 This is a "Ready to Ship" Rotation System in Excellent Condition

1 ea T704008 Aronson Model WRD-30 30,000 lb Drive Roll Only. 30,000 lb weight capacity. 90,000 lb turning capacity. 8" to 18’ diameter capacity. Variable speed from 1.4 to 40 IPM. 20" diameter x 7" wide rubber wheels with overload discs. 240/460 volt. Serial #N/A Good Condition

T808002 Ransom SA-15PR/SA-7.5IR “Rustler” 15 Ton Turning Roll Set. Drive and Idler. Ransome Rustler rolls automatically adjust to take any circular piece from 12” to 10’ diameter. 30,000 lb weight capacity. 12” diameter x 3.5” wide rubber wheels. Variable speed travel from 4.8 to 48 ipm. Pendant Control. 230 or 460 volt. Serial #7925369/8025370 Good Condition

T810030 Aronson WND60CS-86 Turbine Turning Roll Set. 60 ton capacity. 8” to 6’ diameter capacity. Constant speed rotation. 27” diameter x 5.75” wide neoprene wheels. Serial #7386 Good Condition

1 ea T605019 Teledyne-Readco 150 Ton Turbine Rolls. 150 Ton Weight Capacity. 4" to 48" Diameter Capacity. Variable Speed Electric/Hydraulic Drive. 23-1/2" Diameter x 16" Wide Rubber Wheels. Drive and Idler. Serial #105839/105840 Very Good Condition

1 set T008002P Aronson 200 Ton "Twin Driver" Turning Rolls. Model WSD-200-S2G. 3’ to 10’ diameter capacity. Twin Driver Turning Rolls use one Driven Wheel on each Roll Stand. Also one of these driven wheels has Two Final Gear Drive Worm Gears on each side of the axle, thus the two pinions work in opposite directions to Eliminate Backlash. This Design was developed by Aronson for Babcock & Wilcox so the turning rolls could be used under Vertical Boring Mills. Ser.# 667 Good Condition

CIRCULAR WELDERS & WELD A-ROUNDS

C808012 Cypress CW-5 (CWE-1500) Programmable Circle Welder. For solid wire or flux cored welding process. 1”-12” welding diameter capacity. Variable speed rotation from .3 to 130 ipm. The CW-5 may be used with any CV power supply with connections for 115 VAC and weld contactor. Features include: Wire feed head and control, gun and cable assembly, burnback control, 50’ control cable and gas hose, vertical and horizontal rack adjustment, rise and fall cam with 5” of movement, pre and post flow kit, over lap function and return to start position function. 115 volt. Serial #60707222001A Purchased NEW in June, 2007 – NEVER USED

C808013 Cypress CW-5 (CWE-1500) Programmable Circle Welder. For solid wire or flux cored welding process. 1”-12” welding diameter capacity. Variable speed rotation from .3 to 130 ipm. The CW-5 may be used with any CV power supply with connections for 115 VAC and weld contactor. Features include: Wire feed head and control, gun and cable assembly, burnback control, 50’ control cable and gas hose, vertical and horizontal rack adjustment, rise and fall cam with 5” of movement, pre and post flow kit, over lap function and return to start position function. 115 volt. Serial #60707222002A Purchased NEW in June, 2007 – NEVER USED

1 ea C608003 Compakomatic Model 1025 Rotomatic Mig Weld-A-Round. 0 to 6" Diameter Capacity. Manual Adjustable Height. Variable Speed from .30 to 15 RPM. Adjustable Rotational Overlap from 0 to 360 Degrees. 6" Air Torch Lifter. Model 375 Rotational Control. 600 amp Current Capacity. Miller 300 amp Power Supply. Serial #GM-154 Good Condition

1 ea C804006 Compakomatic Model 920E Weld-a-Round. 8" maximum part diameter. 13" maximum part height (can be increased with a riser). 7" pneumatic torch lifter. Compakomatic series 400 control. 115 volt. Serial #GM241 Good Condition

1 ea C604008 Machine Technologies GTAW Weld-a-Round. 12" Part Diameter Capacity. 6" Part Height Capacity (Can be Increased with a Torch Riser). 1" Vertical Torch Lifter. Weld Over Lap Timer. All Functions Controlled with a Programable PLC. Welding Equipment Includes a 1994 Miller Maxstar 152 with Snap Start, Miller Water Circulator and a 250 Amp Water Cooled Tig Torch. Serial #1-549-2 Good Condition

1 ea C508001 Rumble Automation Weld-A-Round Circular "Spud" Welding Station. 5" Vertical Stroke. Variable Speed Torch Rotation by a 3 Turn Potentiometer. 36" High Work Table. 32" Part Diameter Capacity. 6" Diameter Weld Capacity. Currently Equipped with a Hobart Auto-CVS Wire Feeder. Power Supply NOT Included. 575 volt. Serial #100-64-3712 Good Condition

C810002P Bancroft Weld-A-Round 300 Circular “Spud” Welder. The Weld-A-Round 300 is the most popular stationary circular welding system in the welding industry. 300 Amp ground capacity. 75 lb clamping force. 8” vertical stroke. 0.7 to 14 RPM travel speed. 24” diameter round table. Welding equipment NOT included. Serial #n/a Good Condition

1 ea C612015 Bancroft Weld-A-Round 300 Circular "Spud" Welder. The Weld-A-Round 300 is the most Popular Stationary Circular Welding System in the Welding Industry. 300 Amp Ground Capacity. 75 lb Clamping Force. 8" Vertical Stroke. 0.7 to 14 RPM Travel Speed. Welding Equipment NOT Included. Serial #50359-10 Good Condition

1 ea C612014 Bancroft Weld-A-Round 300 Circular "Spud" Welder. The Weld-A-Round 300 is the most Popular Stationary Circular Welding System in the Welding Industry. 300 Amp Ground Capacity. 75 lb Clamping Force. 8" Vertical Stroke. 0.7 to 14 RPM Travel Speed. Equipped with rise and fall option. Welding Equipment NOT Included. Serial #50123-01 Good Condition

1 ea C609008 Bancroft Weld-A-Round 300 Circular "Spud" Welder. The Weld-A-Round 300 is the most Popular Stationary Circular Welding System in the Welding Industry. 300 Amp Ground Capacity. 75 lb Clamping Force. 8" Vertical Stroke. 0.7 to 14 RPM Travel Speed. Bench Mounted. Welding Equipment NOT Included. Serial #N/A Good Condition

1 ea C512001 Bancroft 350 High Capacity Dual Head, 3 Station Indexing Weld-a-Round. Bancroft is the Manufacturer of the Most Popular Stationary Circular Welding System in the Welding Industry. Both Weld Stations have 8" Vertical Stroke with a 150 lb Clamping Force and Variable Speed Torch Rotation from 0.7 to14 RPM. 300 amp Capacity. A 3 Position Indexing Table for Loading of Parts and Welding Under 2 Separate Weld Stations. Can be Used for 2 Passes on One Part or One Pass on Two Individual Parts with Proper Fixtures. Currently Set up for GTAW Application. Serial #3300/109-003 Good Condition

1 ea C501001 WeldLogic CWT-12-15V Vertical Welding Positioner. Precision Vertical Positioner with Self-Centering 3 Jaw Chuck, 6" Dia. Torch Holder Post with Pneumatic Torch Retract. 100 lb Capacity. Serial #CWT-12SN9413 Very Good Condition

1 ea C412001 Alloy Custom Circular Welder. 75 lb Capacity, Variable Speed (0.8 – 50 RPM) 4" 3-Jaw Chuck, Lever Actuated Gravity Type Part Hold Down Mounted on 6" Slide. 6" Maximum Part Diameter, 6" Maximum Part Height. 3 Axes of Torch Adjustment. Analogue Weld Control – 10 Turn Potentiometer for Accurate Speed Control, Start/Stop w/ E-Stop, Forward/Reverse. Manual Flip-down 4" x 5" Shaded Lens for Weld Viewing Good Condition

1 ea C205002 Alltra Corporation Model VWL2436 Circular Welder. Vertical Lathe with an 18" Part Diameter Capacity, 24" Part Length Capacity and an Air Actuated Centering Head. A Complete System that Includes a Lincoln DC-400 CC/CV Power Supply, Lincoln NA-5R Head and Control with a Lincoln Analog Interface Procedure Control, Miller Coolmate 4 Water Circulator, 20" Motorized Horizontal and Vertical Cross Slides, Allen-Bradley SLC5/04 Control and Allen-Bradley Panelview 1400 Monitor with Operator Friendly Touch Screen Programming. Manufactured in 1998. Serial #2211 Excellent Condition

1 ea C805022 Cecil Peck Circular Welder. Hand Wheel Table Lift. 1 to 6" welding diameter capacity. 43" part diameter capacity. Variable Speed Rotation. Pedestal Control Console for all Functions. Welding equipment NOT included. Serial #n/a. Good Condition

1 ea C406001P Cecil Peck Circular Welder. Manual Table Lift. No Table. 1" to 6" Diameter Capacity. Variable Speed Rotation. Pedestal Control Console for all Functions. No Welding Equipment. Serial #N/A As Is Price

1 ea C204001 Cecil Peck Circular Welder. Hand Wheel Table Lift. 36" x 30" Tee Slotted Table. Variable Speed Rotation. Pedestal Control Console for all Functions. Equipped with a Lincoln NA-2 Submerged Arc Control and Welding Head and a R3S-600 Power Supply. Serial #69203 Good Condition

WELDING LATHES

1 ea L604009 Custom 12" GTAW Welding Lathe. 6"-12" Part Length Capacity. 9" Maximum Diameter Capacity. 6" Stroke Pneumatic Tailstock. 5" Pneumatic Torch Lifter. All Functions Controlled by an Allen-Bradley SLC-500 Programmable PLC. Rotary Ground. Welding Equipment Includes a Powcon 150STP Power Supply and a 120 amp Air Cooled Tig Torch. Serial # N/A Good Condition

L501001 WeldLogic CWT-12-15 GTAW Welding Lathe System. CWT-12-15 Variable Speed Headstock with Pneumatic Tailstock, 4" stroke. Arc Length Controlled Vertical Slide. 6" 3-Jaw Self-Centering Chuck. Pneumatic Torch Retract (to rear). Manual Vertical Slide w/ 10" of Adjustment. Manual Rotary Slide for Torch Angle Adjustment. Cold Wire Feeder and Mini Wire Delivery Guide. WP-22 Automatic Tig Torch. Max Part Length – 15", Max Part Diameter – 10-1/2". Serial #9413-014. Very Good Condition

1 ea L708010 Bancroft Model 605 Dual Head Welding Lathe. 14" Maximum length capacity. 14" Maximum diameter capacity. 800 lb load capacity. Variable speed rotation from 1 to 20 RPM. Weld overlap timer. 2 each mig welding heads that each include a Bancroft wire feed system, 4" Vertical and 4" horizontal cross slides and air torch lifters. 120 volt Serial #3565/115-990 Good Condition

1 ea L708011 Bancroft Model 605 Dual Head Welding Lathe. 14" Maximum length capacity. 14" Maximum diameter capacity. 800 lb load capacity. Variable speed rotation from 1 to 20 RPM. Weld overlap timer. 2 each mig welding heads that each include a Bancroft wire feed system, 4" Vertical and 4" horizontal cross slides and air torch lifters. 120 volt Serial #3565/115-990-1 Good Condition

1 ea L708012 Bancroft Model 605 Single Head Welding Lathe. 14" Maximum length capacity. 14" Maximum diameter capacity. 800 lb load capacity. Variable speed rotation from 1 to 20 RPM. Weld overlap timer. Bancroft wire feed system, 4" Vertical and 4" horizontal cross slides and air torch lifters. 120 volt Serial #3558/115-980-1 Good Condition

1 ea L708013 Bancroft Model 605 Single Head Welding Lathe. 14" Maximum length capacity. 14" Maximum diameter capacity. 800 lb load capacity. Variable speed rotation from 1 to 20 RPM. Weld overlap timer. Bancroft wire feed system, 4" Vertical and 4" horizontal cross slides and air torch lifters. 120 volt Serial #3558/115-980 Good Condition

L809002 Compak-o-matic Model 1027-101 19.5” x 42” Mig Welding Lathe. 19.5” maximum diameter capacity. 42” maximum length capacity. 7” pneumatic torch lifter. 8” stroke pneumatic tailstock. 600 amp rotary ground. Wire feed head. Welding power supply NOT included. Serial #HR149.
Good Condition

L809003 Compak-o-matic Model 1050 20” x 52” Mig Welding Lathe. 20” maximum diameter capacity. 52” maximum length capacity. 7” pneumatic torch lifter. 4” stroke pneumatic tailstock. 4” manual cross seam adjuster. 360 degree torch swivel mount. 2.5” in/out torch adjuster. 600 amp rotary ground. Wire feed head. Welding power supply NOT included. Serial #HG106. Good Condition

L809004 Compak-o-matic Model 1010 20” x 20” Mig Welding Lathe. 20” maximum diameter capacity. 20” maximum length capacity. 7” pneumatic torch lifter. 5.5” stroke pneumatic tailstock. 3” vertical torch adjuster. 2” horizontal torch adjuster. 600 amp rotary ground. Wire feed head. Welding power supply NOT included. Serial #HG-113. Good Condition

1 ea L708009 Bancroft Model 1208 30 Degree Incline Rotary Welder. 800 lb Weight capacity. 44" Maximum Diameter Capacity. Welding bed is fixed at a 30 degree angle. .01 to 10 RPM variable speed rotation. Weld overlap timer. Miller 60 series wire feed system with vertical and horizontal croos slides and an air torch lifter. 120 volt. Serial #3334/110-086 Good Condition

1 ea L608004 Jetline 14" x 14" Mig Welding Lathe. 14" Part Diameter Capacity. 14" Length Capacity. Jetline ZB-100 Positioner, 100 lb Weight Capacity. Air Actuated Tail Stock for Part Clamping. Vertical, Horizontal and Rotary Cross Slides. Miller 300 amp Power Supply. 230/460 Volt. Serial #910424 Good Condition

1 ea L705007 Jetline ZB-100B Benchmaster Welding Lathe. 16" diameter capacity. 17" maximum length capacity. 100 lb weight capacity @ 4" C.G.. Variable speed travel from .1 to 5.0 rpm. 7" diameter 3-jaw self centering chuck. Jetline Model 3018 Base. Jetline 4501A torch holder. Jetline 1016A cross slides. Jetline TS-200B air actuated tailstock. On/off foot pedal. 115 volt. Serial #87401 Very Good Condition

1 ea L601001 Jetline Model CWP-24 90 Degree Power Tilting Lathe Bed. 200 lb Weight Capacity. 20.5" Length Capacity. 12" Diameter Capacity. For use as a Vertical or Horizontal Welding Lathe with a 90 Degree Powered Tilting Bed. 8" Capacity Chuck with a 1/2" thru hole for back purging. 3" Air Actuated Tailstock for Part Clamping. Jetline ALC101-V4T Arc Length Controller. Jetline Model 9024-101 Circumferential Tig Weld Sequencer. Variable Speed Torch Carriage for Either Circumferential or Longitudinal Welding. Powered Torch Lifter. Powered Slides. 115 volt. Serial #920131 Good Condition

1 ea L708007 Bancroft Model 1208 4 Head Welding Lathe. 48" Maximum length capacity. 22" Maximum diameter capacity. 800 lb load capacity. Variable speed rotation from .05 to 10 RPM. Weld overlap timer. 4 each mig welding heads that each include a Miller S-60 wire feed system, Miller Optima 300 pulse pendant, Vertical and horizontal cross slides and air torch lifters. 120 volt Serial #3369-(111-367) Good Condition

1 ea L708008 Bancroft Model 1208 4 Head Welding Lathe. 48" Maximum length capacity. 22" Maximum diameter capacity. 800 lb load capacity. Variable speed rotation from .05 to 10 RPM. Weld overlap timer. 4 each mig welding heads that each include a Miller S-60 wire feed system, Miller Optima 300 pulse pendant, Vertical and horizontal cross slides and air torch lifters. 120 volt Serial #3266-00 Good Condition

1 ea L803015 Weldlogic Model CWT-102 Weld Lathe. 200 lb weight capacity. 13" length capacity. 12" maximum part diameter capacity. 6" diameter 3-jaw self centering chuck. Arc length control. Weldlogic Pulsarc 300-STD DC power supply. Pendant Control. Serial #523 Good Condition

1 ea L804004 Merrick Engineering 64" GTAW Welding Lathe. 12" Maximum part diameter. 64" Maximum part length, 98" side beam with manual spotting car. Merrick Volt Track II arc voltage control. Cold wire feeder, 2" manual cross slides. 360 degree rotary slide. Serial #N/A Good Condition

1 ea L512002 Bancroft High Capacity 3 Station, Dual Torch, Indexing Welding Lathe. 23" Length Capacity, 12" Diameter Capacity. 3 Position Indexing Turret for Loading of Parts, Welding of Parts and Cooling of Parts. 2 Torches for Welding on both Ends of Parts. GMAW Welding Equipment Includes 2 each Miller S-62 Wire Feeders with Tweco Water Cooled Auto Guns on 4" Bancroft Retractable Air Slides. Serial #3327/109-843 Good Condition

1 ea L305001 Bancroft Model VH-24 Welding Lathe. 33" Long x 48" Diameter Capacity. Pneumatic Torch Lifter, Forward and Reverse Variable Speed, Weld Overlap Timer and a Miller 60M Control and Feed Head Serial #3609-(117-212) Good Condition

1 ea L305002 Bancroft Model VH-24 Welding Lathe. 33" Long x 48" Diameter Capacity. Pneumatic Torch Lifter, Forward and Reverse Variable Speed, Weld Overlap Timer and a Miller 60M Control and Feed Head Serial #3610-(117-213) Good Condition

1 ea L206001P Stoody Screw Flight Tig Hard Surfacing Lathe. Capacity of 7" Diameter (may be increased) x 144" Long. This Machine was used for Hard Surfacing with #6 CoCrA Solid Lengths. Has Oscillating Head, Preheat System, Control Console and 500 amp Miller DC Power Supply. Just Out of Service, Good Operating Condition!

1 ea L9912001 Bancroft Welding Lathe. Work Piece Capacity 24" X 72". Bed 12’ Overall, Tailstock has Air Cylinder for part clamping. Linde Automatic Head w/Cross Slides. Variable Speed Rotation For/Rev. As-Is Re-conditioned to Proper Working Order

1 ea L610002 Jetline Model CWL-72 Lathe and 13’ Side Beam. 500 lb Capacity Variable Speed Headstock / Tailstock. 30" diameter Capacity. 72" Length Capacity (Can Increased to 48" - 120" Capacity with a Spacer). 13’ Side Beam with a Manual Spotting Car that has 12’6" of Travel. Welding Equipment Includes a Jetline Model 9500 System Control, ALC-201V6E Arc Length Control, Rotary Slide and Horizontal Slide. Serial #81322 Good Condition

1 ea L1054413 Melton Model 6330 Single Torch Welding Lathe. Capacity30" dia. X 37" long. Programmable A.B. SLC 500 Control. Pneumatic Fixture Clamping. Miller Maxtron 450 Pulse Welding System with Automatic 1DA Control & Head. Welding system completely integrated. Safety Light Curtain, Operator Console w/Palm Buttons. Automatic Leather Curtains. Hood for exhaust. Complete, ready for your fixturing. "1993" Very Good Condition

1 ea L504001 Custom Built Lathe Type Welding Fixture. Estimated weight capacity 350 lbs. Swing Dia. 48", Tailstock is Power Driven on a Lead Screw to increase the available part length from approx. min. of 19’’ to max. of 60". Variable Speed Rotation by DC Drive with Manual Shift Transmission for Three forward Speed Range and One Reverse. Rotating Welding Ground included. As Is in Working Orde

1 ea L610001P Cecil Peck 12’ Welding Lathe. 1,000 lb Weight Capacity. 32" Diameter Capacity. 12’ Maximum Length Capacity. Air actuated Tailstock. Linde Model OM-48 Variable Speed Carriage. Step Over Control. 600 amp Rotary Ground. Through Hole Purge on Tailstock Face Plate. Welding Equipment NOT Included. Serial #N/A Good Condition

1 ea L502001 Centurion Model WL24X168 Welding Lathe. 24" Diameter Capacity. 168" Length Capacity. Variable Speed Travel Car and a Manual Spotting Car. Pandjiris Model "A" 31-1/4" Capacity "Gripper" Chuck. Manual Tailstock Mounted on a Powered Travel Car. Powered Elevation Side Beam. Includes a Lincoln DC-600 Power Supply with a NA-3N Sub-Arc System. Good Condition

1 ea L804002 Jetline CW5-192Z Dual Carriage Welding Lathe. 5,000 lb weight capacity. 56" diameter capacity. 192" length capacity. 12" diameter 3-jaw self centering chuck. 6" pneumatic tailstock. 240" side beam with 2 each model SWG-6DZ rack and pinion driven carriages. Each carriage has an 18" manual vertical slide and a 15" horizontal beam with a manual spotting car. Welding equipment includes 2 each Hobart Arcmaster 501 power supplies with HMC-410 4-roll feed heads, controls and water cooled mig guns. Serial #969791 Very Good Condition

AUTOMATED WELDING SYSTEMS

AUTOMATION ACCESSORIES

1 ea PW310001 Thermal-Arc PS-3000 Plasma Welding System Complete. Each System to Include the Following : PS-3000 Power Supply with an Output Range from 5 to 350 amp 300 amp 60% Duty Cycle 208/230/460 volt 1 or 3 Phase, WC100B Weld Control Console, HE-100A Water Cooler, Weld Sequence Package with WT-1 Weld Timer, CS-1 Current Sloper and CP-1 Current Pulser, #870119 Interface Cable and a 180 degree Offset Model 4A 12.5' Plasma Machine Torch, 220 amp, 60% Duty Cycle Excellent Condition

NEW WELD POSITIONER

ROBOTIC TURNTABLES - POSITIONERS

WELDING HEADSTOCKS & TAILSTOCKS